HP 41 CV dead?



#11

When I try to power on my HP 41CV fullnut, all I get is a single beep (after a second) and a blank display.

What's the old girl trying to tell me?

When I try a reset, I momentarily see the the top-half segments of the first four characters.

RZ


#12

Sounds like you are screwed. Tell you what. If you send me the calculator and a $10- bill, I will happily dispose it for you.

#13

I had one of those. Press the case down tightly while pressing the power switch. Works? If so, probably the plastic screw sockets are cracked and there is no pressure holding the circuit board in contact with the display. I used longer screws and some glue to hold it together and now have a working calculator. Clean the contacts while you are at it.

#14

If you are not a DIY type, as I am not, a trip to FixThatCalc.com is money well spent. Randy will rebuild the cracked posts, clean the thing well, and send it back to you with fresh batteries.


#15

If you wish you can repair the cracked posts by your self, the repair consiste of a few drops of cyanocrylate glue, and a wrap of fine wire around the posts until the glue had thoroughly set. then close the calculator carefully.


#16

CA glue is a VERY poor fix. It will almost certainly fail in short order. The only (fairly) reliable fix is to use a plastic welding solvent like methylene chloride (available in small bottles at most good hobby shops). It melts the plastic and allows it to be rejoined like a weld in metal.


#17

Do you know a brand name to ask for?


#18

..

#19

Another product name is Tenax. Both available at HobbyTown. Ambroid is cheaper...


#20

This was the reason for my question. As I recall, someone in the past mentioned that Tenax contains cyanocrylate, which they recommended. I may be doing somethng incorrectly, but I have had poor results with Tenax.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 2,471 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  Previously dead WP 34S is resurrected! JayV 2 616 04-18-2013, 12:41 AM
Last Post: Walter B
  Does anyone want dead 82001 battery packs? Michae Altmann 6 944 03-15-2013, 07:32 PM
Last Post: Harald
  Dead 50g after 3 months Chris Smith 13 1,491 03-13-2013, 12:28 PM
Last Post: chris smith
  More or less dead HP-67 Bernd Ulmann (Germany) 7 1,020 02-09-2013, 12:53 PM
Last Post: Ignazio Cara (Italy)
  HP-29c keyboard dead 2nd row problem Xavier A. (Brazil) 6 1,021 07-17-2012, 07:09 AM
Last Post: Xavier A. (Brazil)
  Can my CV take a CL board? Les Wright 5 889 06-03-2012, 08:33 PM
Last Post: Les Wright
  NoV-64: Possible to Burn Time Module for Use on a CV? Les Wright 10 1,246 06-02-2012, 11:40 PM
Last Post: M. Joury
  WP 34S and 'dead' HP20B Rob Willett 17 2,069 10-20-2011, 06:49 PM
Last Post: Egan Ford
  hp-12c from HP.com arrives with dead batteries Masaki Adachi 4 768 09-30-2011, 05:25 PM
Last Post: Masaki Adachi

Forum Jump: