48sx all indicators on.



#2

Hello,

I've noticed this morning that all the indicators are on and wont turn off. Any ideas?

Thanks


#3

WORSE CASE DIAGNOSIS:

If the unit was made in the USA, then it is likely that the LCD is defective. There was a batch of HP48SX calculators that had defective LCDs that eventually either lost columns of pixels and/or had defective annunciators.


#4

Well spot Han, it was made in USA...But, should it shows after 15 years.?
Thanks.


#5

Joan,

One of the interesting things I heard from HP at the HHC2006 conference last year, is that the graphics calculator (perhaps more so the newer models) may not last as long as the old HP vintage calculators. The explanation given by HP is that using much smaller circuits makes these ultra-fine circuits wear easier as the electrons whiz by.

Namir


#6

That's rich. Can they say "Kinpo?"


#7

It's not Kinpo per se, its the newer designs that uses circuits that have much smaller connections. My own conclusion is that if TI uses the same technology, the same will degradation be true for Graphing TI calculators.

The impact is important, because 20 or 30 yars from now they may not be groups like HHC or this museum that still use/play with today's graphing calculators.

Namir

Edited: 6 Jan 2007, 10:01 p.m.

#8

It's a real problem. See electromigration.

#9

Quote:
(...) wear easier as the electrons whiz by.

This reminds me of a question during studies (ages ago, btw).

Someone asked whether or not the accumulator register of the 6502 was made of better quality than the X and Y registers, because it was used so much more often.



just a story ...


#10

Bram,

There might be some truth to your story. I was very surprised to hear HP's Cyril B (the R&D person) state that comment about tiny circuits wearing out. I guess only sparsely-used graphing calculators will survive into the distant future.

Namir


#11

This is the dirty little secret of integrated circuit technology. The current density in those 90nm, or 45nm or whatever wires is incredibly high, orders of magnitude worse than what it was back when line widths were 6um. This is why I expect my HP45 to be chugging along long after a new 50g has died.

Monte


#12

Monte,

I am with you on that 200%

Namir

#13

Not "better quality" in the way you are probably thinking, because all of the circuit elements on an integrated circuit share the same "quality". But the transistors may have been physically larger, to drive larger loads. In addition, they may have used larger power supply connections for the same reason. This kind of optimization was done per transistor back in those days, but today design tools automatically pick the drive strength of logic elements for the designer and size the power-supply busses as necessary.

Monte


#14

Monte,

Thanks for the clarification ... I am not an electronics guy ... so thank you for wording it very nicely!

Namir


Possibly Related Threads...
Thread Author Replies Views Last Post
  The HP Graphers 48SX - 50G Jedidiah Smith 11 1,086 04-08-2013, 08:35 PM
Last Post: gene wright
  Need help - HP 48SX bank switching 1MB card JJB299 1 351 11-07-2012, 07:34 AM
Last Post: Raymond Del Tondo
  HP 48SX equation library card transfer Vincent Weber 3 570 09-01-2012, 10:23 AM
Last Post: aurelio
  HP 48SX Solve Equation Library Cards Mike Hein 3 603 08-22-2012, 01:07 PM
Last Post: Chris Dreher
  Stack Replacement for HP 48SX bluesun08 2 426 05-17-2012, 02:35 PM
Last Post: bluesun08
  Odd Bringslid HP 48SX aj04062 1 319 05-01-2011, 01:26 AM
Last Post: Jesse Dodd
  48sx Numerical Integration Question svisvanatha 4 529 03-10-2011, 06:38 AM
Last Post: svisvanatha
  48sx repair help svisvanatha 7 674 02-04-2011, 09:16 AM
Last Post: Han
  HP-48SX Repair - Diode aj04062 3 402 04-21-2010, 05:26 PM
Last Post: aj04062
  Determining HP 48sx ROM version by SN? megarat 27 1,982 04-15-2010, 04:09 AM
Last Post: Ignazio Cara (Italy)

Forum Jump: