The following warnings occurred:
Warning [2] Undefined array key 101928 - Line: 275 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 275 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101929 - Line: 275 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 275 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101945 - Line: 275 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 275 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101946 - Line: 275 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 275 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101953 - Line: 275 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 275 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined variable $thread - Line: 295 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 295 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Trying to access array offset on value of type null - Line: 295 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 295 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined variable $fid - Line: 295 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 295 errorHandler->error_callback
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101953 - Line: 331 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 331 errorHandler->error_callback
/inc/plugins/threaded_mode.php 332 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 332 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 332 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 304 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined array key 101945 - Line: 331 - File: inc/plugins/threaded_mode.php PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php 331 errorHandler->error_callback
/inc/plugins/threaded_mode.php 332 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 304 ThreadedMode::buildtree
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined variable $theme - Line: 3 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 3 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Trying to access array offset on value of type null - Line: 3 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 3 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined variable $theme - Line: 3 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 3 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Trying to access array offset on value of type null - Line: 3 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 3 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Undefined variable $lang - Line: 5 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 5 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks
Warning [2] Attempt to read property "messages_in_thread" on null - Line: 5 - File: inc/plugins/threaded_mode.php(305) : eval()'d code PHP 8.1.2-1ubuntu2.14 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/inc/plugins/threaded_mode.php(305) : eval()'d code 5 errorHandler->error_callback
/inc/plugins/threaded_mode.php 305 eval
/inc/plugins/threaded_mode.php 23 ThreadedMode::showthread_threaded
/inc/class_plugins.php 142 threaded_mode_showthread_threaded
/showthread.php 918 pluginSystem->run_hooks





Those solid block characters in the characters menu.



#6

When you hit rightshift and char, in order to get to the screen with all of the various characters and symbols the calculator uses, there are a bunch of solid black boxes heading the list. I'd like to modify how each of these look and use them for variables, but when I use the resulting symbol in an equation I get a context error or something. Does anyone know what these characters are for?


#7

If you look at an ASCII code table, you will notice that codes below #32d (#20h, Space) are designated to control functions. On your PC, these are created by holding down the Ctrl key together with a character key.

Some of these have well known names, such as SOH, STX, ETX, EOT, BS, CR, LF, FF, DLE, XON, XOFF. They have special meanings to devices that understand them (e. g. a printer feeds the paper one line if it encounters a LF, #10d.) In most fonts the control characters aren't assigned.

The black boxes in the character table of the 48/49/50 series are these control characters. The command line parser seems to handle them in a special way so that they can't be used outside of strings.

Marcus


#8

True, the codes 0d through 31d and 127d are "ASCII control codes". The calculators use 10d (ASCII Line Feed) as a "New Line" code. In the 48 series, 27d (ASCII Escape) causes the parser to ignore at least some of the restrictions on the following character.

Some of the control codes (which ones depend on the model) have a "graphical representation" other than the small square.

Other than that, the ASCII control codes (except 27d), along with the characters space, semicolon, and whichever of period or comma is not the "fraction mark" character, function as separator characters (like "white space") for the parser. On the 48 series, character 160d (ECMA 94 "non-breaking space") is treated the same as a space character and is a separator, but in the 49 series, 160d is used for the Euro character, and is not a separator.

But note that the semicolon character by itself (enclosed by separators) is a command on the 49 series. If there's anything on the stack, it behaves the same as DROP; otherwise it does nothing.

Any series of separators is treated the same as a single separator.

According to ECMA 94, codes 128d through 159d are control codes, but the calculators treat them as ordinary "graphic" characters.

Within a character string, all characters are treated as "literal characters", never as separators or delimiters. One may want to use control codes as printer commands or escape sequences, or one could have an application parse a string according to its own rules.

Regards,
James

Edited: 2 Nov 2006, 9:03 p.m.


#9

PS:

Certain restrictions are (ordinarily) imposed on global names.
Most of these are for the sake of the parsers. For example, a
global name should not contain any separators ("white space"), any
delimiter characters, any of various mathematical operator
characters (such as +, -, *, /, <, =, >, and so on), it shouldn't
start with a numeric character (numerals 0 through 9 and whichever
of period or comma is the fraction mark), although you can have
numeric characters anywhere else in the name, and it shouldn't be
the same as a built-in name. Also, a global name should have at
least one character and no more than 127 characters.

I don't know the reason for the restriction to 127 characters; the
two-nibble "character count" field in a global name object should
allow up to 255 characters, although 127 characters seems "long
enough" for my purposes. Perhaps it was a restriction imposed by
whatever operating system or compiler the developers of UserRPL
were using, or perhaps it was originally a "nibble count" (like
some other objects have) instead of a "character count" (or maybe
someone was thinking that it was).

However, the 48 and 49 series do have a $>ID SysRPL command that
converts a character string to an ID (global name), and an ID>$
SysRPL command that does the reverse. On the 49 series, if you
have library 256 attached, you can use the S~N command to toggle a
string to a global name or vice versa. Also on the 49 series, the
filer has a "RENAME" operation that allows you to replace any
global name with any other name. These work with any string of up
255 characters, even to make what would otherwise be "invalid" as
a global name. I don't recall exactly what happens if you try
making a global name with over 255 characters, but I expect that
it would be a bad thing to do.

So you can make a global name such as 'A B' that contains a
separator, or '1+2' which begins with a numeric character and
contains a mathematical operator, or 'SIN' that duplicates a
built-in name, or with up to 255 characters. However, the wisdom
of doing so seems very doubtful, as the parsers, such as pressing
ENTER with a command line present, perhaps other editors such as
the equation writer or matrix writer, STR\-> (which I think Conn4x
"Text" transfers use), OBJ\-> on a string, or receiving a Kermit
"ASCII" transfer, will very likely interpret the "global name"
differently from what you intended, or give you an "Invalid
Syntax" error.

Also note that Conn4x translates (if needed) global names to file
names that are valid as "long file names" for MS Windows on
transfers from the calculator, and does the reverse translation on
transfers to the calculator.

For storing as a binary-transferred file on an MMC or SD card, if
the global name would be a long file name with MS Windows, the
file is stored with both the long file name and an "8.3" MS-DOS
short file name.

For other file transfers, such as Kermit or Xmodem, you should
choose a name that will be valid both as a global name and a file
name for whatever file system is used on the other device.

Note that if you have the calculator set to use the comma as the
fraction mark, then the period is a separator, so transferring a
file with a "file name extension" to the calculator fails.

Regards,
James

#10

It's been a while since I've done this, so I'm a bit fuzzy on the details, but you can make your own custom fonts.

When you're in the character browser, highlight the character that you want to modify and press the MODIF (D or F4) menu key. A "pixel map" of the character will be displayed, with the current pixel indicated by a small square. Press the "." key to toggle the pixel between off and on. Press the menu key SCAN to go back to the character browser, or CHR- or CHR+ to step to a different character. Press either CANCEL or ENTER to exit the browser and have the modified font used as the "current font".

To save the font, execute FONT\-> to put the current font on the stack (it will look similar to: Ft8_0:SYSTEM 8), and the store it in a global variable with whatever name you like. The built-in fonts can be recalled with the FONT6, FONT7, and FONT8 commands, and a font on level 1 is made current with the \->FONT command.

Also, for more information, try searches at http://groups.google.com/group/comp.sys.hp48? and http://www.hpcalc.org/. You can probably find some custom fonts at http://www.hpcalc.org/.

For the 48 series, this isn't built-in, but search for something like "universal font".

Regards,
James


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 50g - select characters on the stack, copy/paste Sean Freeman 7 2,609 11-20-2013, 07:11 AM
Last Post: Sean Freeman
  What does the Send menu key in the Apps window do? John Colvin 3 1,581 10-23-2013, 10:56 AM
Last Post: Tim Wessman
  Sending ASCII Characters from or to the PRIME Harold A Climer 2 1,363 10-18-2013, 04:28 PM
Last Post: CompSystems
  HP 75d: pale lcd characters Michael Fehlhammer 0 788 02-25-2013, 07:04 AM
Last Post: Michael Fehlhammer
  [BUG] HP 50g SOLVE/SOLVR menu does not display unknown var François Vanzeveren 3 1,343 09-20-2011, 06:56 AM
Last Post: C.Ret
  There's a new RPL kid on the block Oliver Unter Ecker 7 2,077 03-21-2011, 07:44 PM
Last Post: Oliver Unter Ecker
  48SX Soft Menu Key Problem J Grim 3 1,344 04-06-2010, 01:08 PM
Last Post: Nacho
  special characters on hp71b + hp-il + 82162a ? John Ioannidis 1 936 01-26-2010, 06:51 PM
Last Post: Raymund Heuvel
  The best way to save a HEPAX block to mass storage? Geir Isene 1 818 12-30-2009, 07:24 PM
Last Post: Vieira, Luiz C. (Brazil)
  Clearing the menu line Lawrence Hare 11 2,605 04-09-2009, 03:00 PM
Last Post: Karl Schneider

Forum Jump: