Can Debug4x be used for HP 39G/40G development ?



#2

The question is already in the subject. Has anybody ever used Debug4x to create a library for the HP 39G or 40G?

I've already asked this question in comp.sys.hp48 and got an answer from Jean-Yves Avenard:

Quote:
I do it...

Even work on the 40gs ROM with Debug4x

Here is my follow up:
Quote:
OK, Jean Yves. Can you detail the steps to follow?

A few things come in my mind:

(1) Get the matching emulator ROM and KML (already done)

(2) Get the correct SUPROMxx.* files (either from WSR or the SDK; which is current?)

(3) Get the correct include files (same question as for (2))

(4) Start a project (there is no check mark for the HP39/40 in the project window; what are the settings? I want to create a library.)

(5) Compile

(6) Load the lib into the emulator (I fear that does not work the same way
as for the 48/49 because the machine is so different)

(7) Debug

I'd be glad for any pointers.

You may have noticed that I want to create a communications library for the 39/40. Did you see my post "Creating SysRPL library to exchange data between 39G/40G series and 49G series?" Can provide some help?

Thanks in advance.


Jean-Yves replied that he does not use the Debug4x project feature. He then referred me to his pages at [link]http://etudiant.epita.fr/~avenar_j/hp/39.html[link]

Here is my last post on the topic after which the thread ended:

Quote:
Jean-Yves,

thanks for the info. I've already looked at your site and downloaded the SDK and other files. The 39G/40G emulator is up and running.

>I do not use the project feature.

Here comes my next question. I compiled the ApletFrame (with the makefile, under CygWin) and the compile went through without problems. I can load the Aplet into the Emulator (via a virtual serial port and Conn3x) and I can start it. What I can't do is debug the aplet with symbols. So how do I setup my environment in Debug4x? Can I compile (and load) from there?


No more info on the topic since then :-(

Can anybody in this community help me further?

Marcus


#3

I don't think I have ever seen anyone successfully load anything into the 39/40 emulators. There was a small utility to do that for the 38, but I haven't seen it anywhere for quite a while.

TW


#4

Loading the software isn't a problem. I use Conn3x and a pair of "virtual COM ports" which are internally linked to each other. So I can just use the normal way of downloading aplets and libraries into the emulator.

My problem is how to to compile and debug the code with the Debug4x tools.

Marcus


Possibly Related Threads...
Thread Author Replies Views Last Post
  3D Model - HP 50g 49G+ 39G+ 48Gii JJB299 3 412 01-18-2013, 11:51 PM
Last Post: Raymond Del Tondo
  Debug4X and "divide by zero" when attempting build Joe Veazey 3 356 11-25-2012, 08:45 PM
Last Post: Han
  HP-39g II Acquistion Matt Agajanian 54 3,098 07-21-2012, 02:31 AM
Last Post: Gilles Carpentier
  49/50 PC Development Tools Under Linux John R. Graham 1 219 04-24-2012, 03:06 PM
Last Post: Han
  HP20B Development Kit Andres Capdevila 6 540 03-30-2012, 06:26 PM
Last Post: Andres Capdevila
  WP34s Development under Linux? Nobby K. 28 1,577 11-27-2011, 08:32 AM
Last Post: pascal_meheut
  Create empy list on 38g/39g/40g Kiyoshi Akima 4 348 10-25-2011, 10:03 AM
Last Post: M. Joury
  IR communication between HP-39gs and HP-39G Marcus von Cube, Germany 0 176 02-24-2011, 12:52 PM
Last Post: Marcus von Cube, Germany
  Problems with my 40G Tanya Poz 3 334 02-28-2010, 07:07 AM
Last Post: Marcus von Cube, Germany
  HP38G/39G/48SX/48GX./49G Emulator now availble for iPhone/iPod Touch Steve Simpkin 6 520 02-17-2010, 11:42 PM
Last Post: Eric Smith

Forum Jump: