HP41 rechargeable pack repair



#2

Hi,
I got a NiCd pack, almost surely dead. I would like to repair it, but I can't find a safe way to open it without breaking the plastic enclosing.

The same apply to doubling a X-Memory module, should I break the enclosing for sure (like Cristoph says in his book) using a knife, or a lower impact approach exists?

I have another repair to try, a card reader that works well, but one spring on the lock mechanism is not working.
Is it worth to try to repair or better to leave as is?

Giuseppe Marullo


#3

I have repaired several HP-41 battery packs. I have tried using an exacto knife and an exacto saw. In my opinion, the saw works much better and gives you a nicer looking finished product. I have refit the batteries with 1/3 AAA NiMH (nickel metal hydride)soldered in series. Glue the finished pack together with airplane glue. Paul.


#4

Paul,
thank you for your answer. Do you have any photo about the hack? I would like to see an example on how to cut it neatly, this things are not easy to find.

The same apply to the X-Memory modules? Do I need to cut the envelope, no other way?


#5

Pictures shown the opening up of a memory module may be found at ji's web site:

http://www.tla.org/hp41/module.html

I'd also use an exacto knife to create the line where
the two parts will separate (i.e. don't try to cut through,
just create a single continuous scar along the joint, the plactic will open up like a broken zipper once you apply pressure with the blade as shown in the pictures).

**vp


#6

Vassilis,
thank you about the link, I will try it. Thanks to Paul, I find the courage to open the battery pack, I will post photos this evening.
I am buying the 1/3 AAA 120mA/h batteries, since the 220mA/h I got are too big for the rechargeable pack, given I will keep original electronic and connector.

#7

I slice around the joint between the two case halves with a single edge razor blade. This can be rather difficult and time consuming (and a bit dangerous). A saw is easier but can remove too much plastic.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 50g : More on best rechargeable batteries Miguel Toro 1 437 12-12-2013, 05:31 PM
Last Post: David Hayden
  HP 50g : Best rechargeable batteries ? Miguel Toro 14 948 11-16-2013, 03:35 PM
Last Post: Dieter
  Rechargeable 2/3 AAAs in 41C-series Les Wright 7 629 06-14-2012, 12:43 PM
Last Post: Eric Smith
  Replacing Rechargeable Batteries on TDS/SMI RAM cards aj04062 2 335 04-12-2012, 11:20 PM
Last Post: Geoff Quickfall
  HP41 battery pack Cristian Arezzini 1 296 11-07-2011, 06:36 AM
Last Post: Ignazio Cara (Italy)
  Rebuilding a HP41 battery pack M. Joury 10 707 05-19-2011, 05:28 PM
Last Post: M. Joury
  Strange HP41 battery pack Alberto Fenini 5 419 01-07-2011, 12:56 PM
Last Post: Giancarlo
  HP41c rechargeable battery (82120A) circuit diagrams ? John Robinson 0 165 03-09-2010, 07:16 AM
Last Post: John Robinson
  HP41 Rechargeable Battery Pack - three pins ? John Robinson 2 279 03-04-2010, 03:43 AM
Last Post: Chiu Yiu Wai
  "Why Rechargeable Batteries Are Rarely Cost Effective" Egan Ford 11 737 09-22-2009, 10:15 PM
Last Post: Chan Tran

Forum Jump: