HP 41 battery terminal block?


I don't know what else to call the battery block inside the calculator, but I am seeking information on how to make one or where to get one. Mine is corroded badly, and I have put off replacing it for too long. Its time to replace it.

I have used the brass tabs to maintain some integrity, but I am finding that this is a stop gap measure. The corrosion has caused the plastic coating to begin to fail as well.

Does anyone have any ideas on what to try? TIA.



Unless you want to pay a few thousand dollars to have a new flex circuit tooled up your only other alternative is to find another machine with a good one...

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime print terminal CD Dodds 4 1,476 12-06-2013, 10:25 PM
Last Post: CD Dodds
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 3,109 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  HP 41 Battery Pack Rebuild John Ratard 0 1,642 09-29-2012, 01:37 PM
Last Post: John Ratard
  HP 67 Calculator Battery Terminal plus/minus Steve E. 6 1,301 04-30-2012, 03:29 PM
Last Post: Nick R
  aOT--Battery/battery contact care advice needed Matt Agajanian 0 624 04-24-2012, 07:35 PM
Last Post: Matt Agajanian
  HP 41 battery Shield - what is it ? John Robinson 2 720 07-15-2011, 07:12 AM
Last Post: Raymond Del Tondo
  There's a new RPL kid on the block Oliver Unter Ecker 7 1,305 03-21-2011, 07:44 PM
Last Post: Oliver Unter Ecker
  Charging times for HP-41 rebuilt battery pack Timo 2 747 01-07-2011, 11:31 AM
Last Post: Timo
  Rebuilding an HP 41 battery pack DavidShenk 12 1,837 04-22-2010, 03:17 PM
Last Post: Alberto Fenini
  The best way to save a HEPAX block to mass storage? Geir Isene 1 550 12-30-2009, 07:24 PM
Last Post: Vieira, Luiz C. (Brazil)

Forum Jump: