[WP 34S] New GCC - Testing required



#5

We've upgraded our build systems to Yagarto GCC 4.7.2. The resulting code is shorter which makes the switch desirable but as always testing is required to make sure the firmware (only the real calculator is affected) still works.


#6

I just flashed version 3353 and I am getting some strange behaviour here.
Switching to RAD yields a Reset message. Setting FIX 4 does the same.
Switching to P/R yields "xMCLR 55" in the alpha screen and "Error 2464" with "521" displayed as an exponent.
Other functions work fine though, including the new display of complex numbers.

Jeroen


#7

And another one: CPX SQRT(-2) gives i 1.4... in the alpha screen and 0 below (correctly), but then CPX x^2 gives the "Reset" message.

Edited: 6 Jan 2013, 5:29 p.m.


#8

We've had some trouble with the recently updated build tools which is hopefully fixed now.


Possibly Related Threads...
Thread Author Replies Views Last Post
  [WP-34S] Unfortunate key damage with update to V3 :( svisvanatha 5 2,109 12-10-2013, 11:37 PM
Last Post: Les Bell
  WP-34S (Emulator Program Load/Save) Barry Mead 1 1,178 12-09-2013, 05:29 PM
Last Post: Marcus von Cube, Germany
  HP9810A and HP9862A - ROM required? Thomas Falk 0 948 12-07-2013, 09:49 PM
Last Post: Thomas Falk
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 1,702 12-04-2013, 11:14 AM
Last Post: Barry Mead
  WP 34S/43 ?'s Richard Berler 3 1,451 11-10-2013, 02:27 AM
Last Post: Walter B
  My FrankenCulator (wp-34s) FORTIN Pascal 4 1,514 11-09-2013, 06:18 PM
Last Post: FORTIN Pascal
  WP 34S Owner's Handbook Walter B 5 1,935 11-09-2013, 05:34 PM
Last Post: Harald
  wp 34s overlay and programming. FORTIN Pascal 6 2,099 11-08-2013, 01:28 PM
Last Post: Nick_S
  m.dy in display of WP-34S Harold A Climer 3 1,364 11-05-2013, 11:28 AM
Last Post: Andrew Nikitin
  WP 34s : An old problem coming back Miguel Toro 2 1,219 11-05-2013, 03:00 AM
Last Post: Marcus von Cube, Germany

Forum Jump: