USB-41 status update.



#9

Hi all,

First the good news, most of the first orders have already been shipped; a confirmation mail has been sent with tracking info.

Bad news: my desktop's hard drive decided to stop working a few days ago. This has no effect on the production run, but prevents me from working in the development of the new version of the configuration utility, required to reconfigure the Clonix part of the USB-41 interface module.

All units have been shipped with the 82143A emulation preconfigured, so they'll be fully operational as described in the manual.

Will let you know as soon as I can have my system back to "normal" condition and the new ClonixConfig available (hopefully in a couple of weeks)

Fortuantelly I'm one of the two persons in the world who have double back-ups of *everything* (and hope the other person is reading this... :-))

Will keep you posted.

All the best from Spain.

Diego.


#10

HI, Diego;

I must confess I'm one of these: I keep AT LEAST one copy of every slice of data I have, and the most important of them I add a second AND/OR a third copy. Am I a data 'hoarder'?

Cheers.

Luiz (Brazil)


#11

I´m in the club too. I have 2 identical copies of everything (either work or personal), and a 3rd one from the most important things; none of them are in the same physical address also.

But I learnt the hard way: I lost one server with close to 75% of my office work in 2005, and another one in 2006. I still remember those painful days...


#12

Quote:
But I learnt the hard way(...)
So did I... B^(

#13

Hi,

Quote:
But I learnt the hard way(...)

But... Is there *another* way? :-o

Someone should tell me about those kind of things...

Cheers. ;-)

Edited: 14 Apr 2012, 4:29 p.m.


#14

IMHO, you can never have too much redundancy. It seems that Mother Nature has already learned this, in that a copy of our DNA is in each cell of our bodies...

Jake

#15

Diego, thank you for shipping my Nov-64 today.

Where can I learn more about USB-41? I am not seeing anything on your Clonix site.

Les


#16

Hi Les,

The page I was preparing for my site was lost when my hard drive crashed. I'm confident I'll have it ready by the next week, but there are many applications and documents to re-install/restore, so I cannot tell for sure.

In the meantime you can find info on the USB-41 interface module (and about its current functional application) at:

this link for the last thread: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv021.cgi?read=216920#216920

this one for the previous note: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv021.cgi?read=212776

and this one to the manual and demo 82143A utility download: http://www.clonix41.org/Projects/USB-82143A/USB-82143A.zip

Also at a user's request I've extracted some relevant info regarding the USB-41 power features.

I'm still testing the many possible scenarios for powering the HP-41 using the USB-41 interface.

Here is what I've found so far:

-USB-41 can provide power undefinitely without batteries inserted, even when running a program continuously (tested for more the 24 hours) provided no other devices are connected.

-Halfnuts will always show "BAT" indicator when powered from the USB-41, but will also work as expected for as long as necessary.

-Some fullnuts also lite the "BAT" indicator. I've only found this behaviour in a few early HP-41C though. Again, they work as expected no matter how long they're running.

-Card Reader cannot be used without batteries, the "LOW BAT" message will appear in the display as soon as a card is inserted.

-Most units (including CL) can also run indefinetely with both USB-41 and NoV-64. Tested with a complete DISASM of the page #6 (-PRINTER-). Some, however, showed the "BAT" indicator.

Some other peripherals like the Wand and HP-IL may have different effect in the power usage of the 41 but as long as you use it without any other modules/peripherals you can have it
permanently connected and powered.

The USB-41 includes a Schottky diode so no power will "travel" back to the USB port from the HP-41. The other way around can be certainly possible, but since USB supplies 5v and the
diode drop is about 0.4v the batteries will havve to be below 4.6v (mostly depleted) to be "overpassed" by the USB power. Should this case ever happen it won't hurt the batteries either
since there is another internal protection diode in the battery line of the HP-41.

Hope this helps.

Best wishes from the Canary Islands.

Diego.

Edited: 14 Apr 2012, 6:20 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime battery status Chris Pem10 0 422 12-03-2013, 01:07 AM
Last Post: Chris Pem10
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 602 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  HP-41 Clonix&NoV's SW Update. (For the non-Primer's guys out there... :-) Diego Diaz 21 1,988 11-13-2013, 09:00 AM
Last Post: Ángel Martin
  USB flashing/Li-po boards patryk 6 818 09-08-2013, 12:31 PM
Last Post: patryk
  USB Chargers for HP calcs Matt Agajanian 3 561 08-18-2013, 10:58 PM
Last Post: Craig Ruff
  HP-41: CLR & STATUS Geir Isene 0 345 07-01-2013, 03:19 PM
Last Post: Geir Isene
  USB vs DVD Han 9 1,135 04-19-2013, 06:05 PM
Last Post: Robert Prosperi
  HPIB Syntax Error at Status command inaki 3 888 04-06-2013, 07:57 PM
Last Post: Paul Berger (Canada)
  41 System DEMO Module - Update Ángel Martin 0 293 10-21-2012, 07:27 AM
Last Post: Ángel Martin
  File transfers over USB Charles C(UK) 5 688 08-10-2012, 08:04 AM
Last Post: Charles C(UK)

Forum Jump: