Canon Pocketronic - Power Supply


Hi Folks,

Just received a very nice Canon Pocketronic with the famous 13 batteries inside. The cells look nice, I charged with a Bench Supply the 7 small ones at the lower end of the calculator.They still seem to hold a charge.

Unfortunately is the power supply missing, should be 16V DC. The connector had 3 pins, somebody out in the World who knows the voltages of the pins?

Thanks and Regards,




It's a split supply with -10.5 volts and +9 volts. Only the row of 3 pins on the power connector are used, the center one is ground (I don't recall which of the two is + vs -).

While you could use a single supply of 19.5 volts I would not recommend it. The -10.5 volt supply charges the 7 x 2/3AA cells while the +9 volt supply charges the 6 x AA cells. Since they have different capacities you'll either under or over charge one set of cells. However, if these are old cells that need to be replaced anyway, go right ahead.

It's possible to replace all the cells with AAA cells in plastic holders. Somewhere on this forum I described how I did this.




Short question: Do you have by chance an orginal power supply that you could borrow me for a few days starting this Saturday?




Check your PM.

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 9845 option 200 power supply Dave F 2 1,210 05-30-2013, 08:10 AM
Last Post: Dave F
  Canon F-789SGA calculator Mic 2 977 05-03-2013, 10:21 AM
Last Post: Waon Shinyoe (China)
  HP-87 power supply repair philippe_elie 0 693 11-18-2012, 11:12 AM
Last Post: philippe_elie
  OT: Canon SX-300 HD3543 Duane Hess 0 624 05-12-2012, 02:30 AM
Last Post: Duane Hess
  strange classic power supply (pics) Alberto Fenini 4 1,568 01-16-2012, 02:06 PM
Last Post: Ethan Conner
  Bench Power Supply aj04062 1 689 11-12-2011, 01:59 PM
Last Post: Eric Smith
  3V Power Supply Lode 3 1,057 08-31-2011, 02:41 AM
Last Post: Marcus von Cube, Germany
  OT: Canon Pocketronic rebuild advice Michael Meyer 4 1,034 01-10-2011, 03:43 PM
Last Post: Katie Wasserman
  OT: Canon X Mark I Premium Calculator Matt Kernal 12 2,332 01-06-2011, 07:16 AM
Last Post: Martin Pinckney
  HP71b - which power supply Alberto Fenini 6 1,287 08-18-2010, 12:32 PM
Last Post: Alberto Fenini

Forum Jump: