Source for 3M 8242-8 Cold Shrink


I'm ready to start cleaning the amazing amount of goop out of my 9810 printer and repairing the platen with cold shrink tubing, as described by Tony Duell. The specific part number he mentions is "3M 8242-8 Cold Shrink", but I can't find this anywhere. Most online sites seem to use different criteria; for example, specifies minimum and maximum diameters the tubing can handle, rather than part numbers.

If anyone could point me to exactly what to get, I'd appreciate it.


Here is the PDF spec sheet for the tubing. Perhaps he meant 8424-8. It lists a min/max diameter of 0.1-0.82 inches, which is close to the diameter of 0.85 inches mentioned in this thread.


I suspect you're correct; I'll order an 8424 kit and cross my fingers...


Indeed I did mean 8424-8. Sorry....

Possibly Related Threads...
Thread Author Replies Views Last Post
  any open source HP 10BII emulators? John 15 3,303 06-12-2013, 09:58 AM
Last Post: Kimberly Thompson
  HP48 source Han 0 634 05-26-2013, 03:34 PM
Last Post: Han
  Source for N-Cell NiMh Batteries and Charging adapters TnC_Products 14 3,012 12-16-2012, 10:26 AM
Last Post: Dieter
  Building WP-34S calc.bin from source - long post (sorry!) Nigel J Dowrick 5 1,770 07-14-2012, 07:41 AM
Last Post: Paul Dale
  Source (Online) for 71/41 Programs John W Kercheval 15 3,281 06-04-2012, 02:14 PM
Last Post: Christoph Klug
  a tad pricy thermal paper source Duane Hess 7 1,869 11-07-2011, 12:17 PM
Last Post: Duane Hess
  Equivalent generic part # for HP cold-cathode displays... Nick de Smith 0 648 09-22-2011, 03:29 PM
Last Post: Nick de Smith
  Ángel Martin, my Open Source Hero Geir Isene 7 1,829 08-08-2011, 02:26 AM
Last Post: Ángel Martin
  Which cold shrink kit for 9810 printer platen? David Ramsey 1 792 07-19-2011, 04:06 AM
Last Post: Tony Duell
  HP policy on source files Raymund Heuvel 50 8,225 02-17-2011, 12:20 PM
Last Post: Jim Horn

Forum Jump: