Which cold shrink kit for 9810 printer platen?


Title says it all. Tony mentioned that I should use the "smallest" kit, but I don't know what that is.

For example, this kit:

3M 7622 Cold Shrink Wrap Kit 7622-T-110

...is shown as:

insulation OD 0.64" to 1.08"

...but I don't know if that would fit.


I think that is much too large. It needs to fit on the metal spindle from the original platen, which IIRC is about 1/4" in diameter.

I think the kit I used as 3M 8424-8. If you send me an e-mail (ard@p850ug1.demon.co.uk), I'll send you some more information.

Possibly Related Threads...
Thread Author Replies Views Last Post
  Prime Connectivity Kit Suggestion toml_12953 1 1,302 12-06-2013, 10:41 PM
Last Post: Michael de Estrada
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 1,317 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  HP Prime - Connectivity kit purpose bluesun08 2 1,168 11-11-2013, 10:37 AM
Last Post: Michael de Estrada
  Connectivity Kit Les Koller 1 977 11-10-2013, 06:38 PM
Last Post: Michael de Estrada
  Hp PRIME - how to send a list to the connectivity Kit giancarlo 1 979 11-10-2013, 11:50 AM
Last Post: Tim Wessman
  Connectivty Kit for HP Prime needs an "Import Program" Command Eddie W. Shore 3 1,590 10-23-2013, 03:37 PM
Last Post: Eddie W. Shore
  Proper location for files on the PC for Connectivity Kit ,etc. Harold A Climer 8 2,211 10-23-2013, 02:43 AM
Last Post: Marcus von Cube, Germany
  HP Prime vs. 39gII Connectivity Kit Marcus von Cube, Germany 3 1,411 10-09-2013, 05:44 PM
Last Post: Marcus von Cube, Germany
  what can I do with the connectivity kit? bertopl 9 2,363 09-30-2013, 08:57 PM
Last Post: bertopl
  HP Prime Emulator/Conn. kit suggestion Han 2 1,222 09-27-2013, 11:23 AM
Last Post: Han

Forum Jump: