Posts: 2,309
Threads: 116
Joined: Jun 2005
I've measured a fullnut at about 72 mW (12 mA at 6V). There's probably a moderate amount of variation between units.
I'd expect a halfnut to draw less.
Posts: 304
Threads: 32
Joined: Nov 2005
Is the goose flying forwards or backwards? Sorry, couldn't resist ;-)
Posts: 67
Threads: 5
Joined: Apr 2011
From what I could find out there for the flying bird:
From service manual, finseth.com and from 41CL (aka systemyde.com/hp41)
50mA 12.5mA 7.9mA
For IDLE and for OFF:
1mA 1mA 4.2mA
0.05mA 0.02mA 0.11mA
I made once some investigations, I can't remember the details, but the current consumption was in the order of the numbers from service manual (slightly below).
But as already mentioned: your mileage might vary
Posts: 887
Threads: 9
Joined: Jul 2007
My owner's manual, P.381-382, says for program running it's 5-20mA; for ON but idle it's .5 to 2.0mA, and for OFF it's .01 to .05mA. This is a 41cx Halfnut. I used to go a couple of years on a set of batteries, then got a double extended memory module and that took the battery life down to about six months.