HP-42S display

[Dick]

I inherited an HP-42S calulator and have no manual for it.

I have been able to use it for simple math functions, which is all I require. However, all of a sudden it changed display formats and I don't know how to get it to switch back to the normal 2 line basic display??

Any help would be most appreciated.

Thanks

Dick

[Thomas Okken]

It sounds like it's showing a menu and that's why you're only seeing X, instead of seeing both X and Y. If that is indeed the case, you can get rid of the menu by pressing EXIT; you may have to press it more than once if you're inside a nested menu.


If it's the number display format you're talking about, you can control that using the DISP menu (Shift E): FIX, followed by a two-digit number from 0 to 11, selects fixed mode, where you see a constant number of digits behind the decimal; SCI selects scientific notation, where there's always an exponent of 10, even if the number could be displayed without one; ENG, or engineering mode, is like SCI mode except the exponent is always a multiple of 3, making it easier to convert to SI-style magnitude prefixes. ALL mode is like FIX 11 but does not display trailing zeroes.

HTH,

- Thomas

[DavidShenk]

Hi Dick,

It sounds like your calculator is defective and should be sold to someone on the forum for $10 ;)

You can try resetting it by turning it off, then hold down the "ON" key, press and hold the E+ and XEQ buttons, then release the On button. This will erase everything in it's memory, but should bring you back to default.

Dave

[Walter B]

What Dave describes is a RESET of your HP-42S. Think of the 3 keys in Windows d;-)

You may as well have entered complex or matrix mode. Please note scans of the original manuals are available in pdf through this museum for little money. Excellent ROI.

[Martin Pinckney]

Quote:

---

Please note scans of the original manuals are available in pdf through this museum for little money. Excellent ROI.

---

However, if you want quick and free, try this.