How are the nylon(?) rollers attached to the shaft? for example, is the nylon roller bonded to the steel, or is it more like a tire that is glued on? Has anyone ever tried replacing them with something?
HP-97 printer paper feed cam shaft
|
|
« Next Oldest | Next Newest »
|
▼
03-05-2010, 07:52 PM
▼
03-06-2010, 03:59 AM
Hello Ed, Regards Ignazio ▼
03-06-2010, 09:20 AM
That should be in Geoff's book if it's not already. Are the o-rings the same size as the ones used for the card reader repair? ▼
03-06-2010, 12:34 PM
Hello Michael, Thanks.
Ignazio Edited: 6 Mar 2010, 12:40 p.m. ▼
03-08-2010, 04:48 PM
Hi Ignazio, Couple questions. First, are the "supports" embedded within the rubber? It looks like they are. Second, how did you get the plastic parts that the rubber is molded to off the shaft? Looks like one would need a thin, strong slotted "collar" of some kind to slip behind the part, then press on the steel shaft using an arbor press. I have found a person who can possibly mold new rubber on if I can get them off the shaft. Ed ▼
03-09-2010, 04:36 AM
Hi Ed,
I hope I understood your questions. To the second question, it's very trivial to take apart the cilinder from the shaft. You must push the pin of the shaft against a strong surface, holding the cilinder tightly. I will show the way with a photo as well.
I hope to be helpful, for now. Ignazio ▼
03-09-2010, 07:29 PM
That worked worked. Only problem is the spring jumped out. After much searching I finally found it. Believe it or not, it had jumped into the little box I had been putting my little parts i! I've now sent the wheels off to a person who rebuilds this kind of stuff for turntables and the like. Says he can do it. I'll let you know, probably in a week or two. Thanks for all your help. Ed |
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
PIL-box w/o IL cable = paper weight | Joe Horn | 15 | 4,857 |
11-26-2013, 01:05 AM Last Post: Les Wright |
|
HP-97 Printer Malfunction | Dan Lewis | 17 | 5,184 |
11-25-2013, 10:18 AM Last Post: Thomas Chrapkiewicz |
|
HP-97 Printer Troubleshooting | aj04062 | 6 | 2,478 |
10-15-2013, 08:45 PM Last Post: Eric Smith |
|
HP-97 Printer Head | aj04062 | 1 | 1,148 |
09-11-2013, 09:18 PM Last Post: Randy |
|
HP-97 Printer Head | aj04062 | 0 | 919 |
09-10-2013, 09:19 PM Last Post: aj04062 |
|
HP-97 Printer parts | davorin | 5 | 2,045 |
08-29-2013, 02:10 AM Last Post: Benoit Maag |
|
Paper on the errors in HP Calculators vs some older computer processors | Les Koller | 3 | 1,728 |
08-19-2013, 12:37 PM Last Post: Mike Morrow |
|
HP-97 Printer Repair Adventure | LHH | 9 | 2,794 |
05-17-2012, 03:09 AM Last Post: LHH |
|
How does the HP-97 printer paper feed work? | Harald | 5 | 2,210 |
03-31-2012, 09:31 AM Last Post: Harald |
|
HP Printer paper... any worries? | Greg Swartz | 6 | 2,268 |
02-01-2012, 09:42 AM Last Post: Greg Swartz |