Problems with my 40G



#2

Please, I need advice!!!!
My 40g calculator displays the 'invalid card data' message. It blinks and beeps and does not allow me to perform any actions on it. When I take batteries out and back in, it does all the same. The calculator does not react to any key.
Does anyone knows what can be done? Thank you!


#3

From the manual:

Resetting the HP 39G/40G

If the calculator “locks up” and seems to be stuck, you must
reset it. This is much like resetting a PC. It cancels certain
operations, restores certain conditions, and clears temporary
memory locations. However, it does not clear stored data
(variables, aplet databases, programs) unless you use the
procedure below, “To erase all memory and reset defaults”.

To reset using the keyboard

Press and hold the ON key and the third menu key simultaneously, then release them. If the calculator does not respond to the above key sequence, then:

1. Turn the calculator over and locate the small hole in the
back of the calculator.

2. Insert the end of a straightened metal paper clip into the
hole as far as it will go. Hold it there for 1 second, then
remove it.

3. Press ON. If necessary, press ON and the first and last
menu keys simultaneously.

To erase all memory and reset defaults

If the calculator does not respond to the above resetting procedures, you might need to restart it by erasing all of memory. You will lose everything you have stored. All factory-default settings are restored.

1. Press and hold the ON key, the first menu key, and the last menu key simultaneously.

2. Release all keys.

Note: To cancel this process, release only the top-row keys, then press the third menu key.


#4

Oh, Marcus, thank you so much!!!
It really works now!!! Now I actually thought it was something more serious with it!!!


#5

As usual: If everything else fails, read the documentation. ;)

Which steps did you follow to render you 40g functional again?


Possibly Related Threads...
Thread Author Replies Views Last Post
  Create empy list on 38g/39g/40g Kiyoshi Akima 4 499 10-25-2011, 10:03 AM
Last Post: M. Joury
  TI-83 Plus vs. HP 20B, HP 35S, HP 40G Joerg Woerner 8 781 01-08-2009, 07:04 PM
Last Post: Steve Simpkin
  Creating SysRPL library to exchange data between 39G/40G series and 49G series Marcus von Cube, Germany 4 544 10-28-2006, 04:00 AM
Last Post: Marcus von Cube, Germany
  Can Debug4x be used for HP 39G/40G development ? Marcus von Cube, Germany 2 378 10-27-2006, 09:53 AM
Last Post: Marcus von Cube, Germany
  HP-40G: Failed or not failed keyboard test. Peter 0 219 06-30-2006, 06:13 PM
Last Post: Peter
  HP-40G: Failed keyboard test. Peter 0 239 06-30-2006, 06:05 PM
Last Post: Peter
  Stupid Question: Difference btn. 38G and 40G Maximilian Hohmann 4 513 06-11-2005, 03:05 AM
Last Post: R Lion
  HP 40G problem mapet 0 256 09-20-2002, 10:23 AM
Last Post: mapet
  40g Jim 4 542 04-13-2001, 05:39 PM
Last Post: jim

Forum Jump: