HP-12C, Comma in wrong position in dispaly
#1

A comma has appeared in my display after the frist "0". Does anyone know how to get rid of it and get my display back to normal?

#2

This Message was deleted. This empty message preserves the threading when a post with followup(s) is deleted. If all followups have been removed, the original poster may delete this post again to make this placeholder disappear.

#3

That's pretty normal for me :-)

Anyway, you can try this:

1) Turn the 12C off;
2) Press the 'ON' key (keep it pressed);
3) Press the '.' key (keep it pressed);
4) Release the 'ON' key then release the '.' key.

VoilĂ ! Now your display 'normal' again.

#4

Thank you for that, but excuse my ignorance. I don't know what key you are referring too.

#5

The 'ON' key is the key you use to turn the 12C on;
The '.' key is the decimal point key (below the '2' key);

Hope this helps.

Edited: 6 Sept 2006, 12:50 p.m.

#6

DONE...Thanks!!

#7

Yet another post asking how to change the radix (period or comma for "decimal point") on a Voyager-series model has been posted. It's undoubtedly the #1 FAQ, which may have prompted the "deleted" response that I surmise was somewhat gruff.

On the Spice models (e.g., HP-34C), changing the radix required changing an internal jumper in the calculator. The radix never changes accidentally (due to dead or removed battery, for example), but required HP to be careful which units to ship to a given market...

The HP-41 radix mode is set by changing flag 28. 1000's-separator mode (present or absent) is set by changing flag 29. This isn't exactly intuitive, but it allows extra flexibility in programs. There seem to be few complaints about wrong modes; perhaps these don't get changed accidentally...

The Voyager series (e.g., HP-11C) radix mode is set by holding down the "." key while turning the calculator on. This is a very simple, intuitive procedure, once it is learned from the manual. It also saved a valuable keyboard position for a function that is rarely, if ever needed by most users. That's not to say a user might not want to switch occasionally, though: If a foreign math/science/engineering book with numbers were being read, the user could make the numbers displayed on his calc match those in the text.

Apparently, there were complaints from users not knowing how to fix their undesired radix mode on their Voyager-series models. So, all of the successor Pioneer-series models included radix-setting functions that are accessible during operation. Examples: "RDX," (HP-42S); "RADIX," (HP-32S/SII); "./," (HP-20S); "." and "," (HP-17B/BII). These commands are generally keystroke-programmable, as well (if there's a need for it).

The original RPL-based HP-28 and HP-48 don't separate 1000's, for whatever reason...

-- KS


Edited: 8 Sept 2006, 10:49 p.m. after one or more responses were posted

#8

Woodstock models (20 series) had different plug in LED display modules for radix point selection. Since they are quite easy to open it could have almost been a user switchable option if HP made the display modules available for sale.



Possibly Related Threads…
Thread Author Replies Views Last Post
  [HP-Prime - Geometry App] What is wrong with this ? Jean-Michel 2 1,453 10-27-2013, 06:26 PM
Last Post: Jean-Michel
  HP Prime : Programming and the Comma Miguel Toro 7 2,735 10-25-2013, 12:18 PM
Last Post: Miguel Toro
  HP Prime: What's wrong with this program? BruceTTT 6 1,941 10-16-2013, 11:14 AM
Last Post: Eddie W. Shore
  HP Prime Comma for Thousands Separator Michael Gerbasio 3 1,683 10-04-2013, 01:50 PM
Last Post: Michael Gerbasio
  Challenge(?): Intersection curve between two cylinders in a specific position Pier Aiello 15 4,298 09-17-2013, 05:58 PM
Last Post: Pier Aiello
  Correct me if I am wrong Denis Doyon 51 11,378 08-14-2013, 02:53 PM
Last Post: Carey
  Operator keys position: why vertical? Alexander Oestert 23 4,871 12-12-2012, 02:39 PM
Last Post: BruceH
  [WP34s] What am I doing wrong? Dieter 10 2,724 11-18-2012, 04:52 PM
Last Post: Dieter
  Wrong answer when evaluating log(10^-12) Daniel Greenidge 4 1,649 01-26-2012, 05:54 PM
Last Post: Daniel Greenidge
  [WP34s] a) Input position and b) units and c) reminder plate Alexander Oestert 11 3,074 10-12-2011, 06:07 PM
Last Post: Dieter

Forum Jump: