Posts: 1
Threads: 1
Joined: Jan 1970
I was fiddling with my HP-11C trying to remember which key to
depress (along with the ON key) to reset it. Somehow I changed display settings and now get e.g. 1.234.567,89 instead of 1,234,567.89 that I am used to.
Can anyone help me reverse the damage?
thanks,
Randy
Posts: 31
Threads: 2
Joined: Aug 2005
Hello
Try to press "." (decimal point) and ON. In the 15C works.
Have a nice day
Iñigo
Posts: 4,027
Threads: 172
Joined: Aug 2005
Hi;
this is just to enhance Iñigo´s answer, that is correct by itself.
The best way to change the radix mark (decimal separator) in any Voyager (HP10C, 11C, 12C´family´, 15C and 16C) is:
1) Make sure your calculator is turnned off;
2) Press and hold the [.] key;
3) while holding the [.] key, turn the calculator on;
4) release the [.] key.
This sequence toggles the decimal separator (and thousands and well) between dot and comma.
Hope this helps.
Edited: 14 July 2006, 7:57 p.m.