Re: HP-41CX sun position program.
#1

Hello!

Has sombody plotted barcodes from HP-71 programms on the HP-IL plotter with the commands given from the Zenwand-ROM?

I've no Zenwand-Manual, but I am very interested to use my 71-equipement like my 41-equipement (print and read BC).

Any suggestions?

Thank you and Happy Easter

Wilhlem Loidl

P.S.: Does anybody know a source for the manual?

#2

Hello!

Has sombody plotted barcodes from HP-71 programms on the HP-IL plotter with the commands given from the Zenwand-ROM?

I've no Zenwand-Manual, but I am very interested to use my 71-equipement like my 41-equipement (print and read BC).

Any suggestions?

Thank you and Happy Easter

Wilhlem Loidl

P.S.: Does anybody know a source for the manual?
[/quote]

#3

Wilhelm --

If you enter a password with your post (you might have to register), you can edit and delete your posts that are unreplied. As it was, you simply compounded the mistake.

I can't answer your query, because I lack the HP-IL plotter and Zenwand. If "HP-41CX sun position program" had actually been the topic, I know of two programs. If anyone is interested in that, I could provide the info on Sunday.

Regards,

-- KS

#4

Quote:
If "HP-41CX sun position program" had actually been the topic, I know of two programs. If anyone is interested in that, I could provide the info on Sunday.

I am.

Edited: 14 Apr 2006, 6:23 p.m.

#5

Hello!

Thank you for the lesson!

The sun-position-program in no problem for me.

So I am still searching for comments about using the wand and the plotter with the HP-71 together.

Wilhelm Loidl

#6

I would also like to get copies.

#7

Hello Geir, Forrest,

I guess you've already had a look to the Sun position program in the Hpmuseum library ?

Or do you need a more sophisticated one ?

Etienne

#8

Quote:
I could provide the info on Sunday.

Not to steal Karl's thunder..

It is Sunday and I'm happy to report the Son's position: He is risen and is seated at the right hand of the Father!!

Happy Easter everyone!!

Matt

#9

Does He have a calculator in His right hand ?

Is it an Hp (Holy Pushbutton)

Happy Easter to all!

Etienne

#10

Etienne --

Thank you for mentioning the programs for planet position in the MoHPC HP-41 Software Library, which I'd forgotten about. The suite of routines requires 2946 bytes, which exceeds the 2240-byte main memory of the HP-41. Thus, the user would need to choose which programs to use, and keep the others in Extended Memory if desired. (This requires an X-Memory module for the HP-41C/CV). This application could be well-suited to the HP-42S, which has more than enough memory, but lacks a clock, time/calendar functions, and expandability.

There are at least two other applications:

  1. The "Sun Altitude, Azimuth, Solar Pond Absorption" program from the HP-41 Users' Library Solutions Solar Engineering book. Scans of this book may be purchased on CD or DVD from "The Other Site", which can be found by following www.furlow.org.


  2. A program submitted in 1986 by Tom Sherman called "Sky Map and Compass" will give good answers for azimuth and elevation angles of the following: Sun, Moon, Venus, Mars, Saturn, Jupiter, and many navigational stars. The program as written is compact -- only 165 lines (414 bytes) -- because it utilizes functions and routines from the HP-41 Navigation Pac (required) and the Time Module (required if using an HP-41C/CV). At least one Memory Module or the Quad Memory Module is required if using an HP-41C. I do not have a source code listing in electronic or magnetic form.

-- KS


Edited: 17 Apr 2006, 1:37 a.m.

#11

Quote:
2. A program submitted in 1986 by Tom Sherman called "Sky Map and Compass" will give good answers for azimuth and elevation angles of the following: Sun, Moon, Venus, Mars, Saturn, Jupiter, and many navigational stars. The program as written is compact -- only 165 lines (414 bytes) -- because it utilizes functions and routines from the HP-41 Navigation Pac (required) and the Time Module (required if using an HP-41C/CV). At least one Memory Module or the Quad Memory Module is required if using an HP-41C. I do not have a source code listing in electronic or magnetic form.

Where can I get this?

#12

Why not ask Tom directly ?

E.

#13

He is risen, indeed!

And that was calculated.

#14

Geir --

As Etienne suggested, you should try to contact Tom directly. I received a complete paper copy of his Program Submittal.

For more information, you can follow this archived thread:

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv014.cgi?read=58607#58607

Cheers,

-- KS



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime: run a program in another program Davi Ribeiro de Oliveira 6 2,614 11-11-2013, 08:28 PM
Last Post: Davi Ribeiro de Oliveira
  Challenge(?): Intersection curve between two cylinders in a specific position Pier Aiello 15 4,289 09-17-2013, 05:58 PM
Last Post: Pier Aiello
  Operator keys position: why vertical? Alexander Oestert 23 4,863 12-12-2012, 02:39 PM
Last Post: BruceH
  [WP34s] a) Input position and b) units and c) reminder plate Alexander Oestert 11 3,069 10-12-2011, 06:07 PM
Last Post: Dieter
  41CX Startup Program? Egan Ford 12 2,699 10-15-2009, 02:27 AM
Last Post: Christoph Klug
  HP 41CX locked in program mode Steve Leibson 7 2,102 10-03-2009, 12:15 AM
Last Post: Randy
  HP-41 MCODE: Making an MCODE program call another MCODE program Geir Isene 10 2,772 01-13-2008, 05:58 AM
Last Post: Raymond Del Tondo
  HP-12C, Comma in wrong position in dispaly adam 7 2,062 09-08-2006, 02:01 AM
Last Post: Katie Wasserman
  i lost my program on my 41cx ross denys 9 2,192 12-11-2005, 03:25 AM
Last Post: Garth Wilson
  HP-41CX sun position program. Michel Beaulieu 10 2,327 12-02-2005, 12:31 PM
Last Post: Norris

Forum Jump: