09-29-2005, 04:43 PM
The display on my HP41CV goes on only when I hit the shift button. It goes off when I release the shift button. Otherwise it seems to work OK. Any ideas?
|
HP 41CV
|
09-30-2005, 05:35 PM
This is a rather common problem. Usually caused by old solder flux or other gunk (often invisible) on the display module, connector pins, or the CPU board. Open the machine and clean everything with 91%+ isopropyl alcohol. Keep the alcohol off the display lens or it will leave white spots (that can be polished off). If this does not fix it, the LCD module is probably bad. |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| HP 41CV Repairs | William Mabotja | 3 | 1,580 |
11-20-2013, 04:45 PM Last Post: Mike Powell |
|
| "Packing" syndrome of my HP-41CV | PGILLET | 12 | 3,372 |
11-03-2013, 02:46 PM Last Post: Hans Holzach |
|
| HP-41CV - A Walk Down Memory Lane | Tom Lewis | 9 | 2,689 |
03-18-2013, 11:14 PM Last Post: BShoring |
|
| HP-41CV power problem | Don Davis | 2 | 1,240 |
10-11-2012, 09:13 PM Last Post: Don Davis |
|
| HP-41CV layout vs Voyager's, 35s | Ben Huntsman | 17 | 4,467 |
09-17-2012, 05:30 PM Last Post: Luiz C. Vieira (Brazil) |
|
| HP-41CV System II | aj04062 | 1 | 1,135 |
06-22-2012, 08:49 PM Last Post: Allen |
|
| HP-41CV "tall keys" version | Ignacio Sánchez | 16 | 4,362 |
06-11-2012, 04:59 AM Last Post: Diego Díaz |
|
| HP 41CV defective | aurelio | 7 | 2,444 |
05-16-2012, 03:54 AM Last Post: Frank Boehm (Germany) |
|
| HP-41CV dilemma | Matt Agajanian | 41 | 10,394 |
03-13-2012, 10:56 PM Last Post: Luiz C. Vieira (Brazil) |
|
| Defective HP-41CV for 41CL? | Ernst Fueloep | 3 | 1,322 |
12-13-2011, 12:57 AM Last Post: Juergen Keller |
|