HP-19C key trouble
#1

Each time a number is entered, the led return something like 0.00000000 The Item looks perfectly clean and almost unused. Somebody knows the test I could do in order to fix and solve the problem ? Many thanks

#2

A display of 000000000 (usually without a decimal point) in a Spice series machine is almost always caused by a bad ACT chip. This is the big chip on the circuit board. The only source of a replacement is another Spice series machine (21/25/25C/67/91/92/97). Different machines have different part numbers on the chip, but they all seem compatible. The HP27 chip is NOT compatible.

#3

Many thanks I'll try to replace the chip, and tell you if it works



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime - EEX/X/Toolbox-key suggestions bluesun08 2 1,488 11-07-2013, 06:15 PM
Last Post: bluesun08
  HP PRIME : strange behavior when trying user key capability Damien 12 3,800 11-03-2013, 11:02 AM
Last Post: Joe Horn
  HP PRIME: How to use [a b/c] key from a program Joseph Ec 4 1,853 10-29-2013, 06:18 PM
Last Post: Joseph Ec
  Roll-down key in HP-15C Steve Ross 6 2,221 10-15-2013, 04:12 AM
Last Post: Nick_S
  trouble flashing wp34s under Linux Glenn Becker 8 2,715 07-23-2013, 02:21 AM
Last Post: Marcus von Cube, Germany
  TVM WP34s trouble Jim P 4 1,723 06-28-2013, 07:31 AM
Last Post: fhub
  Trouble dumping Pioneer ROM via IR Neil Hamilton (Ottawa) 6 2,434 06-20-2013, 08:14 AM
Last Post: Neil Hamilton (Ottawa)
  41CL :TROUBLE IN FILE TRANsFER aurelio 22 5,972 06-18-2013, 03:44 PM
Last Post: aurelio
  HP-15 LE Key repair question Namir 2 1,407 06-10-2013, 10:42 PM
Last Post: Namir
  Trouble entering a HP35s program line Arno 2 1,496 04-05-2013, 06:28 PM
Last Post: Arno

Forum Jump: