ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT
#1

Please help ...
I got this item from a friend and I was not able to access its 32K (64K or 128K) RAM.
I used ES-RSU1A & 2A, Zenrom and Rambox but nothing happened?!
The first 8K ROM returned NO RSU PAGE when INIPRGM a page.
It seems to need a special software according to its label.
No switch available outside.
However there's two switches inside with two positions for each.
Thanks for help.

12345

#2

Dear Emmanuel,

does your RAM-Bos lost the internal operating system ? Or is this available on port E and F ?

Regards - Christoph

#3

There's no OS in the RAMBOX and impossible to write in it ?!

#4

Dear Emmanuel,

may be your RAM-Box have an hardware failure. Normally - after reasing the pages you are able to load ROM-images to the RAM-Box by using an OS (stored on Zeprom or Clonix)
From which source you get the RAM-Box

Regards - Christoph

#5

As I recall, (and this is going WAY back), the RSU RAM unit required a seperate OS ROM plugin module to function.

Don



Possibly Related Threads…
Thread Author Replies Views Last Post
  Hook-µP software by Rush Systems Lute Kamstra 5 2,220 11-29-2013, 01:30 AM
Last Post: Lute Kamstra
  HP 50g - select characters on the stack, copy/paste Sean Freeman 7 2,609 11-20-2013, 07:11 AM
Last Post: Sean Freeman
  Serious discussion regarding soft menus Tim Wessman 24 5,951 10-06-2013, 07:23 PM
Last Post: Helge Gabert
  [HP-Prime] Lack of user soft keys Andy B (Australia) 1 1,134 08-17-2013, 11:00 AM
Last Post: Tim Wessman
  Hp 42s soft keys Paulo MO 10 2,589 11-17-2011, 09:37 PM
Last Post: spb
  HP 71b soft case decomposing... giancarlo 3 1,240 09-05-2011, 05:36 PM
Last Post: Giancarlo
  HP 10bii+ "soft" reset Jim Yohe 3 1,262 05-13-2011, 02:32 AM
Last Post: Tim Wessman
  Can you identify this soft case? Michael de Estrada 1 1,021 04-17-2011, 03:41 PM
Last Post: Martin Pinckney
  Telesensory Systems - any connection to HP? Maximilian Hohmann 7 2,006 11-26-2010, 04:52 AM
Last Post: Thomas Klemm
  ERAMCO ROM BOX Info PeterP 2 1,033 11-10-2010, 08:30 AM
Last Post: PeterP

Forum Jump: