25C repair tip
#1

History: I have had my 25C since I bought it new back in 1977, the calculator was unused for almost eight years sitting in my drawer. With my recent interest in old HP, I decided to revive it. After replacing the old cells with new NiMH cells, I charged it up, and it worked - a kind of.

Problem description: The storage registers would not reliably store and recall numbers. Program memory was erratic, you could key in a program, after a while, you got a lot of GTO 00 in it. I accidently discovered if the calculator was warm (if it is on charger), then the problem would disappear and everything worked. However, when it cools to room temperature, the problem would return.

Calculator affected: HP 25C

Fix: Thank you David Smith and Luiz for their responses, and especially Katie, for her repair tip on
http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=267

This afternoon, I went by the electronics store to pick up the 20K resistor and the zener diode to conduct the EC on my 25C.

After an hour of work, I conclude that Katie's article is absolutely spot on. Although her article did not specifically include the 25C, the procedure she listed for the 25 work beautifully.

I solder a 1/8W 20K resistor across pin 11 and 12 on the ACT chip. I did it on the back side so I don't have to solder over the ACT chip. The 1/8W resistor is preferred, as it is small enough that it barely protrudes above the other pins, and the 25C does not generate nearly enough voltage to overload it.

With that done, the problem is now gone. Both my storage registers and program memory is back in working order, and the Continuous Memory works. Before closing the calculator up, I made another EC by adding the zener diode to protect the fragile electronics.

Observation: The strangest thing is I have never had this problem until now. Everything worked perfectly for 20 years, I only discovered the problem after it came out of an eight year storage. Katie referred to excessive noise on the low frequency clock signal, I began to wonder if the aging of the electronics might have something to do with the noise.

Lesson learned: If you own a 25C, before assuming that register and program memory problems are symptoms of fried memory chips. Try Katie's fix before you give up, you may get a happy ending with a $0.20 part.

#2

Gordon,

I'm glad that you got your 25C working again! Thanks for your repair report, I've updated my article to include the 25C now.

-Katie

#3

Hi Katie,

I want to extend a huge personal thank you for your article.

I would have given up on my 25C if I hadn't come across it, you just gave my 25C a second life. Thank you.



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime Tip: Changing the Color of a Function Eddie W. Shore 3 1,543 10-02-2013, 04:08 PM
Last Post: Jim Horn
  HP Prime Tip: Setting Up User Keys Eddie W. Shore 2 1,504 09-27-2013, 09:53 PM
Last Post: Eddie W. Shore
  HP-25/25C Potential Matt Agajanian 14 4,104 07-17-2013, 02:57 AM
Last Post: Matt Agajanian
  Later HP-25C Keyboard Repair aj04062 2 1,309 04-23-2013, 07:25 PM
Last Post: aj04062
  For sale: HP 25C and Stat Pac 2 for HP 65 Michae Altmann 1 1,105 04-21-2013, 01:24 PM
Last Post: Raymond Del Tondo
  25C rememberss data only Matt Agajanian 7 2,090 04-15-2012, 08:36 PM
Last Post: Matt Agajanian
  29C/25C question. Matt Agajanian 7 2,234 04-03-2012, 12:03 AM
Last Post: Matt Agajanian
  Paint job (not for a car but for my 25C) Matt Agajanian 0 731 04-02-2012, 04:20 PM
Last Post: Matt Agajanian
  LCD repair tip: Missing segments on heat seated ribbon McAllan 7 2,288 03-11-2012, 08:50 PM
Last Post: Joerg Woerner
  HP-25C Repairing aj04062 11 3,116 10-31-2011, 01:11 PM
Last Post: Randy

Forum Jump: