Hi,
I just acquired an OGS Drilpro module for a HP-41,
manufactured by O'Brien-Goins-Simpson & Associates.
Copyright 1986. It didn't come with a manual.
Does anyone have information on this accessory?
Thanks,
Graham
OGS Drilpro Module
|
04-01-2004, 09:12 AM
Hi,
I just acquired an OGS Drilpro module for a HP-41, Does anyone have information on this accessory?
Thanks,
04-01-2004, 11:35 AM
Hi Graham, I recognized the company name as it's not too far from where I used to work. I wish I could help you with info on the module but regretfully cannot. I can however provide you with the following:
15730 Park Row info@ogslab.com Maybe someone at the company can provide the answers you are looking for... hopefully even a manual!! I hope this helps.
04-01-2004, 11:40 AM
Hi Graham. I don't recall this module, however I suspect it is a drilling engineering module built along the same lines as the Petroleum module - arguably designed for reservoir engineers. If it is to be used for drilling engineering (as the Drilpro software), then there would be programs for BHA, cost/ft, ROP, direction, and drilling mud hydraulics. If these twig or look similar, then if you email me a listing of the programs, I'll try to work through some of the stuff with you. I will see if I can find a manual. Being in an oil patch area, I might be able to find one somewheres...
12345
04-01-2004, 01:31 PM
Hi Graham I´m working on a update of Wilson´s and Diego´s module list for HP-41. Could you please give us the exact datas of this module:
Label on the top: You would help all of us. Matthias
04-01-2004, 03:15 PM
In addition to Matthias request, the size (4k, 8k, 12k, ??k) and the XROM number(s) would be helpful as well. |
« Next Oldest | Next Newest »
|