How to change batteries on HP 21

Hello All,

I just got a HP 25, but I don't know how to change the battery pack. It uses 2 batteries, but I don't know how to take them out.

Any help will be greatly appreciated.


I have done this also on my old 25, and you can see a seam along the edge of the pack just above the back of the battery pack (i.e., the outside). You can carefully remove the back from the "frame" of the pack and pull the batteries this way. NiCad AA batteries work very well for this.

Also, Katie Wasserman has written a very good article on this topic:

There are other articles and as I find them I'll put them up also.



I managed to replace the cells in one of my packs by cutting one end of the bar which runs along down between the cells. by carefully bending this partway I was able to get both cells out. I replaced them with 1200mAh NiMh cells several years ago and they work just fine. I charge them a little longer than normal with the standard HP charger.

Hope this helps.

Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 50g : More on best rechargeable batteries Miguel Toro 1 1,767 12-12-2013, 05:31 PM
Last Post: David Hayden
  HP 50g : Best rechargeable batteries ? Miguel Toro 14 4,702 11-16-2013, 03:35 PM
Last Post: Dieter
  Program to change entry mode on Prime Michael de Estrada 3 1,902 10-28-2013, 10:13 AM
Last Post: Han
  Storing HP-42S without batteries Yriarte 4 1,744 10-19-2013, 08:32 PM
Last Post: walter b
  HP PRIME: How to change the column headers and reset data Joseph Ec 5 2,204 10-18-2013, 02:26 PM
Last Post: Joseph Ec
  HP-12C batteries Yriarte 4 1,891 10-12-2013, 10:39 PM
Last Post: Yriarte
  Leading 0 change? Tim Wessman 12 3,133 10-07-2013, 12:11 PM
Last Post: Katie Wasserman
  BATTERIES' SWAP ON HP 48GX aurelio 7 2,612 10-06-2013, 07:50 PM
Last Post: aurelio
  HP 21 - How to troubleshoot? Adam Vaughn 13 3,540 10-02-2013, 09:40 AM
Last Post: Adam Vaughn
  Sharp PC 1211 display change -- problem overnight -- suggestions? Gene Wright 12 3,249 05-16-2012, 03:31 AM
Last Post: Bart (UK)

Forum Jump: