Problem with 48G+

I just got a service replacement [48G+] from HP and I transferred some programs to my 48G+. Problem is after using it for a couple of minutes, it started to go crazy, the screen looked as if part was working and part was not, a set of lines came up on half of the screen and then it just went blank.


You should post this question on the comp.sys.hp48 newsgroup. The experts are all there and they are very friendly. It sounds like a library issue, or a hard failure. If you still have the manual you should find out about doing a "hard" reset. This will erase all your downloaded files, but it should bring the machine back. It is usually done by holding down a key or sequence of keys while turning the machine on. The guys on that news group can help you.

Possibly Related Threads…
Thread Author Replies Views Last Post
  48G problem kc 3 1,217 06-15-2012, 08:33 AM
Last Post: KC
  Memory problem on 48G+ Iqbal 1 798 08-06-2009, 04:35 PM
Last Post: Raymond Del Tondo
  HP 48GX and 48SX and 48G and 48S and 48G+ Mad Dog ebaycalcnut 2 1,083 04-17-2007, 08:55 PM
Last Post: James M. Prange (Michigan)
  Problem with 48G+ Naim 4 1,159 12-16-2006, 05:20 AM
Last Post: Patrick Jamet
  48G compiled local variable problem hal 3 1,096 09-05-2006, 12:54 AM
Last Post: Hal
  48gx = 48g +96k ? = 48g+ +32k? Eric Lundgren 2 1,000 02-21-2005, 03:44 AM
Last Post: James M. Prange (Michigan)
  Weird HP-48G problem Nelson M. Sicuro (Brazil) 10 2,100 11-17-2003, 04:57 PM
Last Post: Nelson M. Sicuro (Brazil)
  97 Card Reader Problem (NOT gummy problem) Peter Khor 5 1,487 10-04-2000, 11:03 AM
Last Post: ErikWahlin

Forum Jump: