HP 41 battery terminal block?
#1

I don't know what else to call the battery block inside the calculator, but I am seeking information on how to make one or where to get one. Mine is corroded badly, and I have put off replacing it for too long. Its time to replace it.

I have used the brass tabs to maintain some integrity, but I am finding that this is a stop gap measure. The corrosion has caused the plastic coating to begin to fail as well.

Does anyone have any ideas on what to try? TIA.

12345

#2

Unless you want to pay a few thousand dollars to have a new flex circuit tooled up your only other alternative is to find another machine with a good one...



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime print terminal CD Dodds 4 2,548 12-06-2013, 10:25 PM
Last Post: CD Dodds
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 5,555 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  HP 41 Battery Pack Rebuild John Ratard 0 2,089 09-29-2012, 01:37 PM
Last Post: John Ratard
  HP 67 Calculator Battery Terminal plus/minus Steve E. 6 2,153 04-30-2012, 03:29 PM
Last Post: Nick R
  aOT--Battery/battery contact care advice needed Matt Agajanian 0 1,118 04-24-2012, 07:35 PM
Last Post: Matt Agajanian
  HP 41 battery Shield - what is it ? John Robinson 2 1,098 07-15-2011, 07:12 AM
Last Post: Raymond Del Tondo
  There's a new RPL kid on the block Oliver Unter Ecker 7 2,077 03-21-2011, 07:44 PM
Last Post: Oliver Unter Ecker
  Charging times for HP-41 rebuilt battery pack Timo 2 1,147 01-07-2011, 11:31 AM
Last Post: Timo
  Rebuilding an HP 41 battery pack DavidShenk 12 3,067 04-22-2010, 03:17 PM
Last Post: Alberto Fenini
  The best way to save a HEPAX block to mass storage? Geir Isene 1 818 12-30-2009, 07:24 PM
Last Post: Vieira, Luiz C. (Brazil)

Forum Jump: