HP-31E Battery Pak
#1

Dear Forum,

One of my sons, knowing of my interest in old HP calcs, gave back to me for Christmas the 31E that I had given him in 1981.

It is in excellent condition with Owners Manual, AC adaptor, but minus the battery pak. My son says it works fine with just the adaptor. But I remember reading in the Forum as to the 25C, never to use the calc on the adaptor without the pak in place.

Questions: Is this true for the 31E and can I somehow rig up a pak using two AA rechargable batteries?

tm

#2

Two AA ni-cad/ni-mh cells and a bit of foil opposite the connector to complete the connection will do in a pinch.

Long-term it's best to get two cells with a strap welded on to make the connection. Don't have the cells glued together, best to have them loose so they can make proper contact. It's the same arangement for Woodstock batteries.

#3

There's next to nothing to do to make a 3x (Spice) series battery pack from scratch. Just order part number P253-F021 from Digikey http://www.digikey.com and put a piece of tape across the gap (between the cells) on one side of the pack to prevent you from inserting it into the calculator the wrong way. Take a look at these pictures to see the right orientation:

http://www.hpmuseum.org/batts/batt30.jpg

http://www.hpmuseum.org/batts/bc30.jpg

#4

Dear Trent,
It also works without adapter.
Just use two 1.5V batteries instead of rechargeable 1.28V batteries.
Yours.
#5

Thank you all so much. It works!

tm

#6

Don't forget that you cannot use 1.5V batteries with charger!!!

#7

Thank you Emmanuel.

I'm using 1.2V Nickel-Metal Hydride.

tm

#8

I've used loose NIMHs too and it works great. I've also used alkaline cells and since i was not sure if the calc wanted a full 1.5v i fed it slightly used batteries.

#9

The woodstock machines need the batteries to not be glued together for proper contact. The spice machines have those spring contacts in the battery compartment that work best with cells that are glued together.



Possibly Related Threads…
Thread Author Replies Views Last Post
  aOT--Battery/battery contact care advice needed Matt Agajanian 0 1,118 04-24-2012, 07:35 PM
Last Post: Matt Agajanian
  HP 31E buttons not responding Adam Vaughn 5 1,755 06-12-2011, 10:58 AM
Last Post: Michael de Estrada
  Dead HP-31E, where do I start? Paul Gaster 12 3,316 01-18-2011, 09:16 AM
Last Post: robert rozee
  TDS 500K dead battery, pictures of the inside of the card and the battery. Geoff Quickfall 4 1,949 04-02-2009, 11:23 PM
Last Post: Geoff Quickfall
  Dirty 31E Hal Bitton in Boise 0 806 03-15-2009, 10:31 AM
Last Post: Hal Bitton in Boise
  How to halt green corrosion on HP45 copper battery contacts in battery bay? JaSon 1 1,038 07-01-2006, 07:27 AM
Last Post: David Smith
  HP 31E Trent Moseley 11 2,582 04-27-2005, 03:16 AM
Last Post: Palmer O. Hanson, Jr.
  HP 21 battery door, not battery pack (Sorry for confusion and thanks for advance guidance) raze 0 769 01-23-2004, 01:29 AM
Last Post: raze
  STAT PAK for HP-48GX Thomas Cox 3 1,095 08-19-2003, 09:00 AM
Last Post: Megha Shyam
  HP-31E's thin Owner's Handbook Valentin Albillo 9 2,180 07-11-2003, 03:30 PM
Last Post: burp

Forum Jump: