RAM-Box, HEPAX, 41-CY... Power requirements.
#1

Hi all,

I'd like to know how much power do those devices need, how long will a fresh battery set last with "normal" usage...

I've been told that they're quite "hungry", but have no accurate info (measurements) about it.

Thanks in advance and best whishes.

Diego.

#2

Diego et at,

My only experience is with the Advanced HEPAX Module (16k RAM). A new battery set will last from three to four weeks when using it frequently (ROM copies, Hepax file management, etc), and will last for about six weeks if only doing a moderate usage of it (MCODE programming, etc).

Not wonderful, but a small price to pay for the wondrous features and capabilities of this device, really a complete RAMBOX fit into the standard module size.

I understand that the CY and RAMBOXES have an auxiliary battery, which I imagine should alleviate this heavy requirement.

Best,
ÁM.

#3

Angel,

the auxiliary battery of the W&W RAMbox is only used when the calculator battery is empty. So it is only used for safety reasons and if you remove the RAMbox from the calc.

It is a lithium(or so) cell which has only little capacity, nevertheless it holds for many years as it is not really used.

I did not check the power consumption of the RAMbox II yet. But HEPAX really needs a lot. Even in a switched-off calc the capacitor is down much earlier than without HEPAX (if batteries are removed).

But I aggree: HEPAX may be the best device ever designed for HP41 ! The OS is much better than that of the W&W RAMbox ...

Best regards,

Werner

#4

Hi,

For some reason (it may be my crazy head) my previous post in this thread has fallen into nowhere land :-o

It was only intented to thank you both you comments and info on the subject.

I was determined to keep my next project power requirement as low as it can be.

Much work ahead, now it's time for a little rest.

Thanks again and Merry Xmas.

Diego.



Possibly Related Threads…
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 10,022 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  42S with nonvolatile RAM Lyuka 5 2,908 12-13-2013, 08:52 AM
Last Post: Lyuka
  PIL-box w/o IL cable = paper weight Joe Horn 15 4,855 11-26-2013, 01:05 AM
Last Post: Les Wright
  Box left at HHC Tim Wessman 1 1,570 09-26-2013, 11:05 PM
Last Post: Wlodek Mier-Jedrzejowicz
  Best way to test HP-71B RAM modules (the 32K/96K ones etc.)? Philippe Lasnier 4 2,351 09-25-2013, 09:54 AM
Last Post: Philippe Lasnier
  HP 2225D+ RAM failure/replacement Luca 4 1,884 09-10-2013, 01:46 PM
Last Post: Luca
  Questions about building a RAM card for hp 48 Waon Shinyoe (China) 0 1,084 07-09-2013, 09:53 PM
Last Post: Waon Shinyoe (China)
  HEPAX Revisited: Revision 1E available Ángel Martin 4 1,565 05-03-2013, 01:57 PM
Last Post: Diego Diaz
  HP-35 and HP-65 Current Requirements Dan Lewis 0 917 03-05-2013, 12:11 AM
Last Post: Dan Lewis
  Looking for scans of a HP-19c Box ledudu 5 2,098 01-20-2013, 06:13 AM
Last Post: Lode

Forum Jump: