HP95LX/200LX IR reception
#1

Hi to all,

I need to know if the IR receptor of the HP-95LX or/and HP-200LX have the capability of receive RED-EYE HP printer format. I know that they can transmit. I'm planning to build a software to "read" print-outs from my HP-42S and HP-17BII to read their ROMs. I cannot use another way right now, as the only IR receivers that I have is on the palmtops, I don't have any HP-48xx calculator.

Thanks!

Nelson

#2

I'm not sure i exactly understand your question, but will give it a shot.

There are several programs at SUPER for the IR port. One of them causes the 200LX to emulate an HP "red eye" (i think the 82240B). I will look through my own collection and see if this can be dug up, should you not be able to find it on the web any more.

best regards,
bill

#3

I'm searching a way to the 200LX (or 95LX) to receive IR printings from the HP-42S and 17BII "emulating" a printer. If I can get enough info on how the IR works I can do a program myself in assembler or Turbo Pascal to it. If is already a program that do that, it'll save some time.

Best regards,

Nelson

#4

AFAIK there is a program from Thomas Rundel to print a screen shot of the 200LX to an IR-printer. But up to today I did not find a program neither for the 200LX nor the 95LX to receive the IR signal from "Blinky" (the IR printer ROM for the HP-41) or the Pioneer calculators. If you find some or do one on your own, pls let me know (see at http://ourworld.compuserve.com/homepages/NutEm/nutem.htm#re). BTW, I asked some experts and none did bite the hook, one even doubts if the timers of the 200LX are stable enough to decode a one-way IR transmision. There is an article in this HP-museum which advices to use the sound card of a PC as stable timer.

Ciao.....Mike

#5

After looking through a couple programs, i think i agree with Mikes post. the program i recalled was for printing to a red eye.

i do recall reading posts a few years back, and running some trials of my own. i used a 41 with the IR module, and was able to filter using a couple escape sequences some of the goobledygook from a PRP to a file on the 200LX which seemed sorta useful, until i suddenly had a 82164A which worked straight up.

best of luck

bill



Possibly Related Threads…
Thread Author Replies Views Last Post
  Help: HP-41CX and IR module Marcel Samek 13 3,930 11-14-2013, 11:00 AM
Last Post: Marcel Samek
  IR printer failure Andrew Nikitin 7 2,419 11-05-2013, 11:25 AM
Last Post: Andrew Nikitin
  Trouble dumping Pioneer ROM via IR Neil Hamilton (Ottawa) 6 2,437 06-20-2013, 08:14 AM
Last Post: Neil Hamilton (Ottawa)
  200LX problem: Insert batteries and get a continuous beep... ideas ? Gene Wright 8 2,657 06-19-2013, 04:52 PM
Last Post: gene wright
  HP42S and IR printer matti 9 2,671 06-10-2013, 12:11 PM
Last Post: matti
  a new variant of the 200LX? robert rozee 1 1,077 06-03-2013, 10:33 AM
Last Post: BShoring
  Does IR printing not work on your converted WP34s? Then read on... Harald 3 1,603 04-04-2013, 05:46 PM
Last Post: Harald
  IR Link Problem: HP48 <-> PC Waon Shinyoe (China) 1 1,110 03-16-2013, 03:37 AM
Last Post: Eric Smith
  WP-34s data exchange with PC over IR Marcel Samek 3 1,469 02-26-2013, 11:53 PM
Last Post: Marcel Samek
  WP34s IR Printing Update? Thomas Chrapkiewicz 2 1,224 02-24-2013, 01:53 PM
Last Post: Marcus von Cube, Germany

Forum Jump: