What programs does the survey module B have.
#1

for the 41C series. i have never seen one of these.

#2

All kinds of neat surveying programs such as coordinate geometry, end area volumes, vertical and horizontal curves, much much more. You know a REAL surveyor should he have one of these, keep the 48 in the data collector mode and give me a 41 with the survey module any day. Dave

#3

i heard about a second survey module that was under development by hp way back when they made real machines. but it was never marketed. there are supposed to be a couple floating around and i almost got to play with one once but.... ive got some good use out of my old co-op 41 module; put 140 & 170 point traverses through it and it worked real good. i even wrote a "corner angle" prgm for checking that ran using the chips subrouines. but as dave says; i use the tds 48 (the devils tool) a lot. the latest version ALMOST does what tds said it would do when they brought it out 10 years ago.



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 41CX Survey Pac Keith Burr 7 2,528 03-29-2013, 10:09 AM
Last Post: Keith Burr
  HP-41C Custom Survey Module Identificaiton Help Dan Grelinger 0 905 01-27-2013, 01:51 PM
Last Post: Dan Grelinger
  Error Message/Procedure HP-48SX with TDS Survey SX card bporter101 6 1,947 12-10-2012, 10:18 AM
Last Post: bporter101
  Survey: Best programming language for next-gen HP? Oliver Unter Ecker 32 8,371 06-06-2012, 03:22 PM
Last Post: David Hayden
  Survey for Special Math Problem Namir 7 2,312 06-03-2012, 09:46 PM
Last Post: Namir
  HP15C LE Keyboard Survey Results M. Joury 23 5,287 10-02-2011, 07:52 PM
Last Post: M. Joury
  HP15C LE Keyboard Survey Take 3 (last round) M. Joury 33 7,058 09-28-2011, 02:28 PM
Last Post: Michael de Estrada
  HP 15C LE Keyboard Survey Redux M. Joury 57 12,683 09-25-2011, 04:03 PM
Last Post: db (martinez, ca.)
  HP15C LE Keyboard Survey M. Joury 50 9,738 09-20-2011, 12:28 PM
Last Post: j beede
  Survey about convergence of iterations Namir 3 1,257 03-22-2009, 04:05 PM
Last Post: Karl Schneider

Forum Jump: