Posts: 5
Threads: 1
Joined: Dec 2013
Hello to all.
the battery of my hp33c leaked and destroyed the flat cable power. I fixed that but then when I turn it on, the numbers on the display appeared without the top showing. I checked if it was bad contact pins on the display board, but not found anything. anyone have any tips?
many thanks,
madjack.
Posts: 378
Threads: 119
Joined: Dec 2009
That would have been my first thing to look at. Have you tried to light them using a diode tester on your multi-meter?
Posts: 5
Threads: 1
Joined: Dec 2013
Quote:
That would have been my first thing to look at. Have you tried to light them using a diode tester on your multi-meter?
good tip. I'll try this. thanks.
Posts: 5
Threads: 1
Joined: Dec 2013
Quote:
good tip. I'll try this. thanks.
I try your sugestion and find the problem. Now the hp 33c back to normal again.
Many thanks.
Madjack
