HP-41CV (+) asnd (-) side
#1

Hi! I got a HP-41CV from a friend but there is no battery holder ;-(. Ireally want to try it (...) so i'll plug 6V directly on the contact to try it. I konw that i need to jump the 2 central connectors but Where is the positif terminal - Left or right??? OR can i plug a AC adaptor in that kind of plug covered by a plastic on the side of the calculator (without batteries) - What is the voltage, ac or dc? These are "just a try" solution; where can i find a battery holder? Thank you, Gina.

#2

Hi;

the central connectors are used only to "close" the circuit when battery holder is used. There is no connection with both central connectors and internal circuitry.

If you hold the calculator in it's "normal" position, say, NOT upside down, and face its back side, the leftmost battery connector is the negative (and the rightmost is the positive) for a 6Vcc power supply. You should use batteries, no AC adapter of any kind; these connectors are DIRECTLY connected to all internal digital IC's, including LCD controller. When I want to read magnetic cards or use the wand (barcode reader) I use four N-size, series connection. I have read at least 300 sides (about 150 cards; I do not have so many cards, I read and write in the same pack). That's one of the most current-consuming operation. The HP41 alone will use a few milliamps to operate, no need for huge current amount.

If your calculator has two golden-plated contacts in the button face of the square hole you mentioned, it's a bit more easy to connect a power supply (still batteries). Keeping the calculator in the same position, I use the topmost (LCD as a reference) as negative, and the other as positive. That's the actual place I connect the external batteries assy, and when I do it, I remove the original battery holder.

Hope this info will help you. If you need something more, post again.

Success.

#3

Hey thanks i have a working HP41!

Thanks again for tips

#4

Hi;

Please, there is an incomplete stence in my previous post; intead of

I use four N-size, series connection.
, read
I use four D-size instead of four N-size, series connection.

N-size is the standard HP41 battery size. Sorry...



Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41 module covers and side port cover Nate Martin 1 1,062 12-02-2013, 01:51 AM
Last Post: Giancarlo
  HP 41CV Repairs William Mabotja 3 1,150 11-20-2013, 04:45 PM
Last Post: Mike Powell
  flood side-effects (not completely OT) Kiyoshi Akima 6 1,918 11-05-2013, 12:06 AM
Last Post: Kiyoshi Akima
  Side effects of the HP Prime Harald 9 2,139 11-04-2013, 12:01 PM
Last Post: Harald
  "Packing" syndrome of my HP-41CV PGILLET 12 2,588 11-03-2013, 02:46 PM
Last Post: Hans Holzach
  HP-41CV - A Walk Down Memory Lane Tom Lewis 9 2,047 03-18-2013, 11:14 PM
Last Post: BShoring
  OT: Beta testers for the dark side of the universe Joerg Woerner 7 1,589 01-28-2013, 12:20 PM
Last Post: Geoff Quickfall
  The dark side (Ti-59) Cristian Arezzini 18 3,368 01-12-2013, 08:52 PM
Last Post: ClausB
  HP-41CV power problem Don Davis 2 926 10-11-2012, 09:13 PM
Last Post: Don Davis
  HP-41CV layout vs Voyager's, 35s Ben Huntsman 17 3,335 09-17-2012, 05:30 PM
Last Post: Luiz C. Vieira (Brazil)

Forum Jump: