Posts: 240
Threads: 97
Joined: Nov 2005
Hi, my father give me when he died a HP-41CX and a lot of accessories that i slowly learn about on this site and other. But there is a module name "Double" and number "A531D" that i don't know anything about: It's a silver tape on the module and not a "engraved" white encryption. Can someone tell me the purpose of this ROM... or RAM... and how to acess it???
Thanks...
Michel Beaulieu,
younger physic teacher than my father
who normally work with TI-Graphic calculator... So excuse me if this module is well known!!! :-)
Posts: 29
Threads: 4
Joined: Jan 1970
Dear Michel,
It seems to be the famous 'Educalc Service Module'.
Sincerely yours. Best regards from Evreux
Posts: 4,027
Threads: 172
Joined: Aug 2005
Hi;
is there any difference when you list CAT 2 contents with and without the module?
I was once told (rumor?) that double memory modules were available for the HP41C, say, two 82106A in one single case. Is it true or just a fairy tale?
If no extra label appears when CAT 2 is executed with this module, I suggest testing it in an HP41C (neither CV, nor CX) and check for extra regular registers.
Best regards
Posts: 237
Threads: 20
Joined: Mar 2006
I have one of the double Extended Memory ROMs. It just says MEMORY on it. If it is a double Etended Memory Module, you can do a CATALOG 6,I think, on the 41CX and it should show a total 600 Bytes if Extended Memory is empty. It has been awhile sense I looked at the Extended Memory CATALOG.
Posts: 240
Threads: 97
Joined: Nov 2005
I remove the module and i saw another label "EDUCALC MODULE SERVICE". I also made a CAT4 with the module i get 600 and without the module i get 124... Perhaps "you" can find now the utility of my module :-)
Thanks for answer!
I have another question; i tried to FIX the decimal with "." but nothing, FIX9 get 9 decimals, FIX0 get 0; normal you say but i hate when the diasplay is full of 0 like 0.0000 or 0.000000000. How to get all the possible decimals without all these 0 when i hit CLX?
Posts: 882
Threads: 23
Joined: Jan 2005
I have another question; i tried to FIX the decimal with "." but nothing, FIX9 get 9 decimals, FIX0 get 0; normal you say but i hate when the diasplay is full of 0 like 0.0000 or 0.000000000. How to get all the possible decimals without all these 0 when i hit CLX?
No way. There is no STD (as it was then named) format on the 41 series.
I like to have a full display instead: CF28 (SF29) FIX9 is my standard boot procedure on a 41...
Greetings,
Massimo