Trouble entering a HP35s program line
#1

Hello,
I hope someone can help me out with this. I found a very useful cashflow program here on the forum http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=896 but I am struggling with entering the following.
The link lists
C013 EQN CF0,CF1, ,CFN

How do I enter this correctly? I tried doing it by pressing the EQN button and my program line looks like this:

C013 CF0,CF1, ,CFN

However the program runs until this point and stops so I assume this is incorrect. What do I have to do to enter it correctly and display it as

C013 EQN CF0,CF1, ,CFN

Any help will be greatly appreciated.

Edited: 5 Apr 2013, 4:51 p.m.

#2

The SF10 in the program causes the machine to display equations, rather than evaluate them. So you should see "CF0,CF1,,CFN" on the top line of your display.

The stopping comes from the line that says "STOP" which (surprisingly) causes the program to stop.

The idea here is that you are given a prompt: Enter CF0, CF1, ..., CFN, pressing R/S (run/stop) after each one.

[If you want to look in the manual, stop is on page 13-19 and SF10 is on page 14-11.]

#3

Thank you so much. I understand the program better now and got it actually working.
Have a good weekend!



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP35s Program Four Slings Lift Calculation Jean-Marc Biram (Australia) 2 2,129 12-16-2013, 07:21 PM
Last Post: Jean-Marc Biram (Australia)
  HP35s Calculator Max Rope Tension Program Jean-Marc Biram (Australia) 10 4,259 12-12-2013, 12:03 AM
Last Post: Jean-Marc Biram (Australia)
  HP Prime: run a program in another program Davi Ribeiro de Oliveira 6 2,615 11-11-2013, 08:28 PM
Last Post: Davi Ribeiro de Oliveira
  Line Print Les Koller 6 2,359 11-11-2013, 09:38 AM
Last Post: Geoff Quickfall
  Line number in Prime program listings Harold A Climer 3 1,841 10-27-2013, 03:37 PM
Last Post: Les Koller
  Entering,Saving,and Analysis /Fitting X Y Data on the Prime Harold A Climer 6 2,427 10-26-2013, 01:54 PM
Last Post: Tim Wessman
  HP-Prime: issues in entering expressions fhub 30 7,663 10-02-2013, 12:32 AM
Last Post: Tim Wessman
  hp50g screen weird line Sok-khieng Chum Hun 2 1,569 09-10-2013, 08:11 AM
Last Post: Sok-khieng Chum Hun
  trouble flashing wp34s under Linux Glenn Becker 8 2,717 07-23-2013, 02:21 AM
Last Post: Marcus von Cube, Germany
  TVM WP34s trouble Jim P 4 1,723 06-28-2013, 07:31 AM
Last Post: fhub

Forum Jump: