Cool math clock

All you math geeks will love this! :-)


some of the values aren't strictly accurate. :-)


And 4 O'Clock doesn't work very well unless you use ln (rather than log - which I usually take to be base 10)


I will admit to not understanding '10'.


I think that should be round(g) -- as in acceleration due to gravity (on earth).


The value of g (acceleration of gravity at the surface of the Earth) is about 9.80 m/sec^2


The value of g (acceleration of gravity at the surface of the Earth) is about 9.80 m/sec^2

The official value is 9.80665 m/(s^2) per definition.



I guess I just assumed that folks would know this was in the units of m/s^2. :-)

I might have to be more careful on this forum and spell it out.


Found a similar one (black background) on Amazon for $21 and ordered it. Thanks for sharing!!!




The numbers might be perfectly accurate. You are just assuming that they are spaced at even 5 minute intervals around the dial when they might not be.


That is the one that I stumbled over as well.


In that last case, aren't you assuming a one hand clock?


Maybe Dan was thinking in Royal British thumbs per s^2? Or Imperial feet per s^2? Or yards per s^2? Who dares to claim he knows ...



I learned g as 32ft/s2. That was 35 years ago and it sticks in my brain.


I don't buy "10" and I don't understand "11".


For me, "10" is the rounded value of acceleration of gravity on Earth, i.e. 9.8 m/s^2; "11" is 0B in hexadecimal.

Other interpretations may be valid, who knows?

For many practical estimations, "10" can be seen as "3 x 3" or "(pi)^2", I use these examples when discussing significant digits issues on my courses.



Somebody cast a hex on the "11"...


In general terms:

1k = 1,000 (a 4 digit number)
im = 1,000,000 (a 7 digit number)
1g = 1,000,000,000 (a 10 digit number
Just a thought.

Mark Hardman


1k = 1,000 (a 4 digit number)
im = 1,000,000 (a 7 digit number)
1g = 1,000,000,000 (a 10 digit number

No, Sir. 1M = 1.000.000 and 1G = All pre-letters greater than k are upper case.


Edited: 6 Apr 2013, 9:08 a.m.


Wow Walter. Did you forget to take your medications today?


Ha! Thanks! I didn't recognize that letter in "0b" as a "b".

If "10" is supposed to be "rounded 9.81", why doesn't it say so as it does with the "3"?

The clock is a nice idea but has too many flaws for my taste.


MASK (Mètre - Ampère - Seconde - Kilogramme) is what I've learned in high school as a universal standard. Regards.

By the way, what is this expression of 7?


That's an indication of repeating decimal digits.

6.9 = 6.99999999999... = 7





Wow Walter. Did you forget to take your medications today?

??? TIA for enlightenment.


P.S. Can't help it, but I've seen such errors only made by US Americans.


Ah, okay, thank you, Gerson.

It is a bit confusing for Europeans (French people particularly) since a dot is rather a multiplication sign than a... coma.
Therefore I saw 9 as a mean value!


Yes, you likely grew up outside the influence of the U.S. When I was in grade school (40 years ago) there was a failed attempt here to push the metric system into wide use. I remember a gasoline station near my home reset their pumps to dispense gasoline in liters instead of gallons. However, instead of pricing gasoline as the equivalent to the station selling in gallons next door, they priced it much higher, assuming that people would not be smart enough to know the difference. That lasted for about 6 months, but obviously people figured it out, and the station had to revert back to pricing in gallons at a competitive price. If only this station had priced their gasoline CHEAPER than competing stations selling in gallons, perhaps the SI conversion in the U.S. would have been successful.

The SI units have been proposed as the 'universal standard', but when a proposal is only adopted by some and not all, it perhaps is not yet truly universal. Not that it shouldn't be. It is just that old habits are hard to break.


So, the symbol at the 10 o'clock position is really 1,000,000,000? ;-)


Good precisions, Dan. If Napoléon hadn't sold Louisiana for peanuts (money unit in the unofficial S.I), perhaps things would have changed another way. But actually... you are right.


Would it conflict with the forum rules if the happy owners of the clocks posted links to sellers?

I found the following in a German shop but most of the math exceeds my abilities.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Need help understanding math.... cyrille de Brébisson 9 3,839 12-13-2013, 02:23 AM
Last Post: Didier Lachieze
  HP Prime - Revision Suggestion - Setting the Clock Bill Triplett 5 2,161 11-15-2013, 12:36 AM
Last Post: Joe Horn
  HP Prime: What would be cool Pete Long 4 1,755 10-20-2013, 10:53 AM
Last Post: toml_12953
  Prime incase anybody missed the clock Dougggg 5 1,955 10-19-2013, 04:05 PM
Last Post: Geoff Quickfall
  Using your HP-65 as a clock! Don Shepherd 24 6,358 10-08-2013, 11:53 AM
Last Post: Don Shepherd
  OT: a math competition site Pier Aiello 0 1,059 09-16-2013, 06:03 AM
Last Post: Pier Aiello
  Simple Math Question Namir 2 1,416 08-09-2013, 06:13 PM
Last Post: Eddie W. Shore
  WP-34s clock program Andrew Nikitin 8 2,637 06-09-2013, 11:20 PM
Last Post: Andrew Nikitin
  Math Challenge I could not solve Meindert Kuipers 22 6,207 01-05-2013, 04:43 PM
Last Post: Thomas Klemm
  Math Question Namir 0 937 11-06-2012, 07:43 AM
Last Post: Namir

Forum Jump: