Posts: 2
Threads: 1
Joined: Jan 1970
Hallo,
ich habe einen HP71B, HPIL, HPIL-PC Card. Ich benötige Infos und ein Programm zur Kommunikation zwischen PC und HP71B. Leider beherrsche ich die englische Sprache nicht so gut und schreibe deshalb in deutsch. Für eine Antwort vielen Dank!
Jörg Voigt
2. eMail: joerg.voigt@ht.hamburg.de
Posts: 280
Threads: 38
Joined: Jan 1970
Benötigst du eine Verbindungssoftware? Freundschaften.
Posts: 304
Threads: 23
Joined: Jul 2007
Hallo Jörg, Hallo Emmanuel,
eine mögliche Software wäre LINK-PLUS. Diese DOS software läuft jedoch nur auf langsamen PC´s z.B. auf einem alten 286/16MHz PC.
a software solution for HP-71 and PC data transfer is LINK PLUS. Unfortunately this runs only on slow speed PCs like a 286/16MHz PC.
Herzliche Grüße - Christoph
Posts: 280
Threads: 38
Joined: Jan 1970
Ich ziehe HPILLINK vor. Diese Software erlaubt dich, dein Hp-71b seit dem PC zu steuern, und dort Daten oder Programme zu bewahren.
Christoph hat Recht. LINKPLUS ist eine hervorragende Software. Wenn du unsere Hilfe benötigst, ist nicht unentschlossen.
Grüsse.
Posts: 280
Threads: 38
Joined: Jan 1970
Andere Sache. Stéphane Barizien hat ein interessantes Werkzeug entwickelt. Cross71. Ich muß es haben irgendein Teil.
Posts: 57
Threads: 3
Joined: Feb 2007
I think, it will be polite if someone translates the thread for the non german speaking people.
Posts: 40
Threads: 10
Joined: Jan 1970
Is LINKPLUS available in the public domain?
Posts: 280
Threads: 38
Joined: Jan 1970
Posts: 304
Threads: 23
Joined: Jul 2007
Here are some more informations about LinkPlus. the company Southern Software who created this nices dos application does no more exist. If someone is looking for this software, please contact me for getting this.
Also : Link Plus kann ich beschaffen...
May be there are some other handheld computer enthusiasts who are looking for a HP-41/PC gateway solution ? In less time we are able to present an absolutely powerfull hardware/software combination for this...
Best wishes from Germany - Christoph
Posts: 2
Threads: 1
Joined: Jan 1970
I got in the meantime the software "HPILLINK". For a test I must procure myself only an old PC. If interest exists can I on my experiences report later.
Jörg
Posts: 280
Threads: 38
Joined: Jan 1970
You can use a Pentium I but its ISA clock is 10MHz and 80286/386/486 is 8MHz. Please choose 'deturbo' or 'slow' in Bios Setup. Reporting your experience will be useful, in my opinion.