LED displays and your kitchen floor

I've heard for years that Future Wax was the way to go for clearing up fine scratches on models with LED displays. Well, tried it last night on a TI as a test and it looked horrible. Perhaps I didn't use enough; I applied it with a Q-tip. Some patches were smooth & shiny, others rough and slightly foggy. And yes, the plastic was cleaned thoroughly before application. Luckily, 409 spray cleaner strips the stuff without damaging the plastic underneath.

Perhaps if I flood the plastic with a little lake of the wax and let it dry, the surface may be more uniform?

Anyone done this and have it turn out ok?



I'm an astronomer amateur, HP user and scale modeller too. For clearing up fine scratches on models with LED displays (sic), I use tooth paste. Really efficient! Yours.


I have had good luck using Brasso to polish out fine scratches.

Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime: FLOOR, iPart , and their use in programs Alberto Candel 6 2,637 12-01-2013, 10:17 PM
Last Post: Alberto Candel
  Safe charging LED HP calcs Anoop Sahal 6 2,284 03-29-2013, 09:08 AM
Last Post: Anoop Sahal
  The smallest ever LED RPN calculator Michael de Estrada 11 3,174 02-16-2012, 10:24 PM
Last Post: Bill Wiese
  HP-21 displays all zeroes Barry Smith 5 1,944 01-27-2012, 01:22 PM
Last Post: Steve Simpkin
  Mini challenge. CEIL / FLOOR in RPN M. Joury 47 10,931 10-31-2011, 10:11 AM
Last Post: M. Joury
  Unusual non-HP RPN (red led display) to restore... Cristian Arezzini 11 2,982 10-24-2011, 02:58 PM
Last Post: Martin Pinckney
  RPN FLOOR and CEIL Werner 4 1,472 09-28-2011, 08:18 AM
Last Post: Werner
  Equivalent generic part # for HP cold-cathode displays... Nick de Smith 0 819 09-22-2011, 03:29 PM
Last Post: Nick de Smith
  Classic HP LED failure diagnosis aj04062 2 1,299 09-17-2011, 05:28 PM
Last Post: aj04062
  1 calculator : LED or LCD snaggs 5 1,880 08-24-2011, 11:26 AM
Last Post: M. Joury

Forum Jump: