Posts: 4,587
Threads: 105
Joined: Jul 2005
Imagine the lower six rows of keys of our hypothetical eightrow calculator are filled with functions not listed below. Two rows are left. The following individual functions compete for the remaining space:
1/x SQRT LN e^x x^2 y^x LG 10^x i [theta] [Sigma+] [Sigma] P>R R>P D>R R>D HR>H.MS H.MS>HR sin cos tan asin acos atan x_bar s y_hat r [parallel] % %CHG x_ROOT(y) LOG[sub_x](y) RAN# H.MS+ H.MS x! COMB PERM ROUND DISP USER ALPHA DSE ISG ABS IP FP
What shall go there? You may specify up to 12 functions in your vote (one post only, please). You may specify them in pairs (unshifted / shifted) if you want to. You must not specify menus.
This poll will terminate on Tuesday, December 18th, at 12:12 UTC. Please participate.
d:)
Posts: 2,761
Threads: 100
Joined: Jul 2005
unshifted: 1/x y^x sqrt ln sin cos tan
shifted: e^x [parallel] asin acos atan
Posts: 1,278
Threads: 44
Joined: Jul 2007
Ans, comma, ( , ) , and =. Nothing else matters.
TW
Edited: 14 Dec 2012, 10:08 a.m.
Posts: 4,587
Threads: 105
Joined: Jul 2005
Sorry, Tim, you obviously didn't read the OP thoroughly :/
Posts: 1,083
Threads: 126
Joined: Sep 2006
P>R, R>P HMS+ HMS IP FP
SIN COS TAN ASIN ACOS ATAN
most used in navigation formulae.
Thanks, Geoff
Posts: 236
Threads: 18
Joined: Aug 2011
P>R,R>P,SQRT,x^2,%,%CHG
SIN,COS,TAN,ASIN,ACOS,ATAN
Posts: 24
Threads: 2
Joined: Oct 2008
Shifted: [Sigma] asin acos atan x^2 y^x
Unshifted: [Sigma+] sin cos tan SQRT 1/x
Posts: 464
Threads: 10
Joined: Jan 2005
n, i, PMT, PV, FV, %, Sigma+
... All of a sudden, I feel lonely...
Nevermind, I love your project :)
Etienne
Posts: 69
Threads: 5
Joined: May 2009
unshifted: sin cos tan LN LG x_ROOT(y)
shifted: asin acos atan e^x 1/x y^x
Posts: 653
Threads: 26
Joined: Aug 2010
IMHO the 35s has a quite useful keyboard layout. I'd like to have something similar to its third row of keys. However, the 35s has two shift keys. If there is just one, I would say this is the most practical layout for general use:
shifted: arcsin arccos arctan x^2 e^x y^x
unshifted: sin cos tan sqrt ln 1/x
As to the six other functions: Phi(x) and Phi^1(x) are used in most social sciences, so they are IMHO a "must" on a scientific calculator. While the parallel function can easily be replaced by a short user program (or a few simple keystrokes), this is not the case for the Normal CDF and its inverse. My suggestion for the second row, assuming "disp" sets the display mode and x! is actually Gamma(x+1):
shifted: Phi^1 x! xroot 10^x Round User
unshifted: Phi % log_x lg Disp Alpha
No, I do not need any complex number support or rectangular/polar conversion functions.
By the way: what about an INV key?
Dieter
Posts: 764
Threads: 118
Joined: Aug 2007
Quote:
Imagine the lower six rows of keys of our hypothetical eightrow calculator are filled with functions not listed below. Two rows are left. The following individual functions compete for the remaining space:
1/x SQRT LN e^x x^2 y^x LG 10^x i [theta] [Sigma+] [Sigma] P>R R>P D>R R>D HR>H.MS H.MS>HR sin cos tan asin acos atan x_bar s y_hat r [parallel] % %CHG x_ROOT(y) LOG[sub_x](y) RAN# H.MS+ H.MS x! COMB PERM ROUND DISP USER ALPHA DSE ISG ABS IP FP
What shall go there? You may specify up to 12 functions in your vote (one post only, please). You may specify them in pairs (unshifted / shifted) if you want to. You must not specify menus.
This poll will terminate on Tuesday, December 18th, at 12:12 UTC. Please participate.
d:)
Unshifted: SQRT, SIN, COS, TAN, LN, >RECT
Shifted: x^2, ASIN, ACOS, ATAN, e^x, >POL
Edited: 14 Dec 2012, 3:45 p.m.
Posts: 70
Threads: 1
Joined: Jan 2012
Unshifted: sin cos tan sqrt e^x y^x
Shifted: asin acos atan x^2 ln 1/x
Edited: 14 Dec 2012, 3:53 p.m.
Posts: 1,665
Threads: 142
Joined: Jan 2009
HYP, HYP<superscript>1, L.R.
Posts: 620
Threads: 14
Joined: Feb 2007
Quote: P>R, R>P HMS+ HMS IP FP
SIN COS TAN ASIN ACOS ATAN
most used in navigation formulae.
+1 (or in plain text: the same for me please ) :)
max
Edited: 14 Dec 2012, 4:26 p.m.
Posts: 556
Threads: 9
Joined: Jul 2007
Quote:
n, i, PMT, PV, FV, %, Sigma+
... All of a sudden, I feel lonely...
Nevermind, I love your project :)
Etienne
You must be kidding, what functions are 'n' and 'i'? What is so important about the supercomplicated function '%'? What's more we are discussing here scientific calculator, not a new version of HP12B.
Posts: 54
Threads: 0
Joined: Aug 2011
Only 12 functions? The premise of this poll seems premature. The fundamental question of whether to load the keyboard top row or dedicate them to menu soft keys is still open, is it not?
It seems to me that the question(s) of keybpard loading are fundamental to the operation (or operability) of the calculator. My preference would be to "load" the keyboard. I would propose blue and yellow functions (in addition to the primary functions) for the second row. The top row would be reassignable soft keys, but absent a menu call these keys would have assigned primary and yellowshifted functions.
Loading the top row with a primary and shifted function (in addition to the soft key assignment) and adding a second shifted function to the second row would give us 30 spots (or 32, counting USER/ALPHA on the third row) and would cover most of the above list of potential functions. This is the question that should be answered first: load the keyboard, or not? Then, we debate the 18, 24, 30, or 32 most popular functions and their placement.
In case I'm alone in this, here are my 12 functions:
1. 1/x (I'd actually make this a data entry key along with +/, EEX, and backspace, but surely >almost< all at least agree that it has to be on the keyboard. I'd make this a primary key.)
2. SQRT (This seems fundamental to me, and I'd like it to be primary. However with only 6 keys, I'd make it the yellowshift of 1/x.)
38. SIN, COS, and TAN with shifted ASIN, ACOS, and ATAN.
910. LN with shifted e^x.
11. LG
12. y^x as the shifted function of LG. (I'd prefer 10^x be located on the LG key with y^x as a separate, primary key but real estate dictates.)
With the exception of #1, these are primary functions in that no closedform calculation exists. With these functions and some stack, we can calculate most anything else that's missing, like H.MS, rect/polar, degrees/radians, TVM, parallel, and IP, FP. Some of these will be bigger losses in terms of convenience/usability than others, and this will vary by person. We >can<, however, get to them without menus. Unfortunately (and I see this as a major compromise) complex numbers, probability, and statistics are completely relegated to menus.
Bill
Posts: 104
Threads: 0
Joined: Dec 2007
I kind of agree with Bill here. There is so much not being asked, and much implied that many seem to have missed.
Since functions like USER and ALPHA are mentioned in the poll, this implies they are not assigned below already. They seem to be crucial to a sophisticated calculator like this is clearly going to be!
Given the layouts shown in other posts, I'm guessing many are assuming those are already present somewhere!?
Here are my choices given the constrains in the poll:
shifted: DISP i y^x x^2 LN SIGMA
primary: USER ALPHA 1/x SQRT e^x SIGMA+
If in fact USER, ALPHA, DISP, or i are preassigned below as has been hinted at before, I'd try to fit the trig functions, giving up lower priority stuff like x^2, and pushing the SIGMAs to a menu, but as it is I couldn't fit some trigs but not others.
I sincerely hope the basic trig functions, as well as LG and 10^x are also available on the keyboard somehow. Since you only allowed me 12, I made the difficult choice.
Posts: 464
Threads: 10
Joined: Jan 2005
Kidding I was, young padawan.
N, I and % indeed to The Dark Side of The Force belong...
The great RPN Jedis, The Beancounter will fight.
HP80 rules !
Posts: 4,587
Threads: 105
Joined: Jul 2005
The simple reason is: I've to sum up your votes at the end of this poll; and I don't want to add let's say 40 times 50 functions  40 times 12 is more convenient for me.
Side effect: this limit lets you feel the difficulty we feel all the time  we simply haven't enough real estate for all those nice functions you want to have, so we have to select. Same for you here.
Thanks for your understanding.
d:)
Posts: 556
Threads: 9
Joined: Jul 2007
1/x SQRT x^2 y^x P>R R>P HR>H.MS H.MS>HR H.MS+ H.MS USER ALPHA
Posts: 169
Threads: 12
Joined: Aug 2007
unshifted SQRT LOG LN y^x 1/x sincos
shifted x^2 10^x e^x y^x x/y PI
Note:sincos calculates sin(x) and cos(x) simultaneously and stores
sin(x) to y and cos(x) to x.
Lyuka
Posts: 3,229
Threads: 42
Joined: Jul 2006
y^{x} and x/y seem weird. x<>y / is the same as x/y and in two keystrokes still  okay slightly different LastX behaviour. y^{x} 1/x or +/ y^{x} are the same as y^{x} again subject to LastX.
Why not xy as a function (reverse subtract) as well?
At least nobody has suggested x^{y} yet :) Must maintain HP 35 compatibility.
 Pauli
Posts: 3,229
Threads: 42
Joined: Jul 2006
First thought:
sqrt, 1/x, x^{2}, y^{x}, USER, ALPHA, sigma+, sigma, y^{1/x}.
Rounds off with LOG, TRIG, CPX.
Unshifted: USER ALPHA, sigma+, LOG, TRIG. Probably CPX or 1/x.
But why not put all that powers into a menu too. We still get two key access to them which is no worse than a shift.
Unshifted: USER, ALPHA, sigma+, POWER, LOG, TRIG.
Shifted: USER1, ALPHA1, sigma, GAMMAs, HYP, ELLIPT.
Maybe swap out sigma+ for STATS or 1/x. Maybe call POWER PARTS or COMMON, SIMPLEMATHSFUNCTIONS.
My all time favourite HP, the 34c has almost all the mathematical functions shifted  a top level menu and one further press is no different. The WP 34S also shifts the maths functions and we've no had major complaints about that either.
 Pauli
Posts: 528
Threads: 40
Joined: Dec 2008
unshifted: 1/x x^2 % USER ALPHA DISP
Shifted: sin cos tan asin acos atan
Dave
Posts: 4,587
Threads: 105
Joined: Jul 2005
Pauli,
I admit I still don't understand why we should need all those four. Maybe I'm wrong but as far as I got it:
 USER shall toggle user mode, so the user assignments come to the front.
 ALPHA shall toggle alpha mode, so the grey letters come to the front.
 ALPHA1 shall switch to alpha mode for input of a single character only, then return to the mode set before.
 USER1 shall switch to user mode for input of a single operation only, then return to the mode set before.
Please confirm or correct.
d:?
Posts: 2,309
Threads: 116
Joined: Jun 2005
I disagree about how the distinction between USER and USER1 (or ALPHA and ALPHA1) occur. I prefer the HP48 method: USER or USER1 are the same key. The behavior depends on the value of a flag.
The default after reset is that a single press of the USER key sets displays a USER1 annunciator and USER mode is active for a single following key sequence (other than another USER press), after which the USER1 annunciator is turned off, and normal mode is resumed.
If, from normal mode, USER is pressed twice consecutively, the first press sets USER1 as described above, but the second press changes the annunciator to USER (no "1"), and USER mode is "locked" on until the USER key is pressed again later, returning to normal mode.
If a "USER lock" flag is set, then a single press of the USER key enters USER lock, and the next USER press returns to normal.
I'm not really sure that ALPHA1 makes a lot of sense on this calculator, but if it is to be done, it should work similarly to USER1, except that I think the default setting should be the opposite (ALPHA lock enabled), and the user should have to clear the ALPHA lock flag to get ALPHA1 behavior.
USER1 is not very useful if it is a separate, shifted function, as it doesn't save keystrokes over the use of a locking USER key.
Posts: 3,229
Threads: 42
Joined: Jul 2006
Correct for all four.
They are all useful in different ways.
With well thought our menus (including user defined), USER1 might end up redundant. ALPHA1 is probably less useful here than on the RPL machines it is derived  this will depend on how we address named registers and locals.
 Pauli
Posts: 3,229
Threads: 42
Joined: Jul 2006
Yeah, the 48 method of press or double press is probably better than shifting one of the two flavours. Either way, a flag to toggle which occurs first is sensible I think.
 Pauli
Posts: 556
Threads: 9
Joined: Jul 2007
Do you really want to see % as primary function?
Posts: 4,587
Threads: 105
Joined: Jul 2005
Seems he does. People are different. Else a function like %T never made it ;)
Posts: 118
Threads: 17
Joined: Oct 2007
Posts: 528
Threads: 40
Joined: Dec 2008
I do. I think % is more useful to more people than the trig functions. I think high end calculators should add to the functionality of low end ones without taking anything away. % is a common function on low end calculators for a good reason.
Dave
Posts: 27
Threads: 2
Joined: Aug 2011
Unshifted: Sigma+ 1/x SQRT LN i DISP
Shifted: Sigma y^x x^2 e^x USER ALPHA
Posts: 653
Threads: 26
Joined: Aug 2010
Quote:
My all time favourite HP, the 34c has almost all the mathematical functions shifted  a top level menu and one further press is no different. The WP 34S also shifts the maths functions and we've no had major complaints about that either.
Both (34C and 34s) keyboards have only seven key rows, so even the most important math functions have to be shifted. That's what I like about the 41C and 35s  their additional 8th key row with these functions makes them much more convenient in everyday use. If the 43s hardware offers these additional keys as well, please use them for the most important math functions.
Dieter
Posts: 54
Threads: 0
Joined: Aug 2011
For me twokey access through a menu is >much< worse than a shift. The 28 was the only calculator I ever owned that I actively disliked. You're right in that it's the same number of keystrokes, so maybe it's just me.
Re the WP 34S: it's an amazing accomplishment, a technical wonder. The completeness of its function set and the accuracy it achieves on a limited hardware platform are remarkable. And it provides access to whole menus full of functionality I'll never need with the same number of keystrokes as the more basic functions that I use every day. Unfortunately, after some effort, I was not able to get comfortable with it. This marvel sits unusedI pick up a 15, a 42, a 48, or even a 35 instead. It's a shame.
I think my problem is this: I'm no mathematical slouch, but there among those whole menus of functions that I'll never use are many that I don't even know how to use, that I've never even heard of being used. Instead of being buried, they're just as accessible as the functions I use all day every day. They get in the way they get in >my< way, anyhow and negatively impact this wonder's usability. I thought it rude to "complain," but since you brought it up, this is how I feel.
If I had a solution to offer short of userreplaceable keys, I would. Lacking one, however, I'm left to advocate for what I see as essential: 1/x, sqrt, y^x, trigs, logs, and their inverses. While I don't use them regularly, sigma+ and i probably need permanent and prominent (primary key) placement to be really useful for those who do.
The WP 43S is proof that you can't give everybody everything that they want. But take the basic onkeyboard functionality of the 15, 41, or 42, add access to the advanced functionality of the WP 34S, and a user menu and you've made a living legend. Don't worry if some of the functions are a few levels deep if we need something esoteric we'll find it and with the ability to customize the menus, this becomes a nonissue. The 42 was almost there with two fewer keys overall, only one shift key, and a lesser display. You can do it!
Bill
Posts: 54
Threads: 0
Joined: Aug 2011
And x^2 instead of sqrt? For the cost of a stack level and (assuming x^2 is primary instead of shifted) one keystroke, I can get to the square of x. I don't know another way (especially if logs and antilogs are absent) to get to the square root of x.
Not arguing, just curious.
Bill
Posts: 4,587
Threads: 105
Joined: Jul 2005
The WP 34S does not feature menus and it never will. This is due to its breathtaking display (as mentioned here frequently). It provides catalogs instead. Cataloged functions may be accessed rapidly using the alphabetic search method described in the manual. This method works so well IMHO that we could have put all the functions in one large catalog there after all. We didn't do that, however, partly for historic reasons, partly since the practical knowledge of the alphabet is ... ummh ... found to be not as extensive as one should think.
The 43S will feature menus and only one catalog. A menu and a catalog are two completely different cups of tea. Please check the information given in earlier posts and you'll know what a menu is.
d:)
Posts: 3,229
Threads: 42
Joined: Jul 2006
From this description, it sounds like we shouldn't even be trying to design a 43S that you'll want to use. We're almost certainly going to have more features and functions than than the 34S, to cram those in we'll have to have menus of some kind  things will have to be left off the keyboard I'm afraid. We're fairly committed to a user mode and an alpha mode and keeping everything else uncluttered would be nice as well. USER mode lets you put want you want where which ought to satisfy more people than us fixing the layout.
The 42S also has some shortcomings  programming it can be painful, alpha entry is painful and there are many nonobvious functions in its menu system too.
 Pauli
Posts: 4,587
Threads: 105
Joined: Jul 2005
Pauli,
I do have difficulties counting your votes. Please read the OP again and clarify. Remember: no menus, 12 functions maximum.
d:)
Posts: 4,587
Threads: 105
Joined: Jul 2005
12 (10 2) 1/x
12 (12 0) SQRT
11 ( 2 9) x^2
11 sin cos tan / asin acos atan
10 ( 4 6) y^x
9 LN / e^x
7 P>R / R>P
5 ( 4 1) ALPHA
5 ( 3 2) USER
3 [Sigma+] / [Sigma]
3 H.MS+ / H.MS
3 ( 2 1) DISP
3 LG
3 i
3 %
2 IP / FP
2 %CHG
1 HR>H.MS / H.MS>HR
1 10^x
1 [theta]
1 [parallel]
1 x_ROOT(y)
d:)
Posts: 455
Threads: 39
Joined: Jan 2011
unshifted: 1/x sqrt(x) e^x ln y^x i
shifted: ?? x^2 10^x lg; ?? < (polar entry of complex umbers)
Edited: 17 Dec 2012, 7:41 a.m.
Posts: 850
Threads: 10
Joined: Mar 2009
Unshifted: % y^x i IP P>R H.MS>HR
shifted : %CHG LG [theta] FP R>P HR>H.MS
Posts: 50
Threads: 1
Joined: Sep 2011
Unshifted / Shifted: Sin / Asin Cos / Acos Tan / Atan x^2 / sqrt x y^x / xth root of y 1/x / ??
No strong views on the last space, those above cover what I use most.
Posts: 1,216
Threads: 75
Joined: Jun 2011
Two of the most important prefix keys (ALPHA and USER) only on place 8 and 9?
And the complex entry 'i' even far behind??
Well, I guess this 43s will not be a calculator for me ... :(
Franz
Edited: 17 Dec 2012, 10:55 a.m.
Posts: 54
Threads: 0
Joined: Aug 2011
Walter: I apologize for my sloppy use of terminology and stand corrected. Know that your educational efforts are not wasted; see how readily I've adapted to LG instead of LOG.
Pauli: I certainly didn't mean to offend. You've already designed a calculator that I >want< to use! I'm just offering my suggestions on how your design might be improved in its next incarnation. The WP 34S improves on the 42S's alpha entry without significant sacrifice. This is a major improvement! The improvements in programming are less useful to me because I'm willing to put up with a bit of pain while programming, but I see how this might be more important to others.
It sounds like the new machine will also be "improved" by omitting the third shift. Because my eye is really drawn to the greenshifted labels, I see this as a big improvement, but I recognize that the tradeoff is an effective loss of keyboard real estate. I think the team is on the right track.
One "improvement" relative to the 42S that's been discussed is not preloading the top row, instead keeping these keys clear for soft keys. This is something that I never found to be an issue on the 42S. When I'm in its ASSIGN or any other menu I see right past the key labels. With a primary and two shifted functions on each of the six secondrow keys and a primary and either one or two (based on earlier information from Walter) shifted functions on the top row, there is enough real estate for a "good" and uncluttered layout. It's just a matter of defining the criteria for "good" that satisfy "most" people. After that, USER will be icing on the cake.
Bill
Posts: 875
Threads: 37
Joined: Jul 2005
A problem is, a lot of people, myself included, would really like the trig functions to be on the keyboard. But they must* come or go as a group, so if you want them, that takes up six of the 12 available spots. I was willing to put them in a TRIGS menu, which would probably be active almost all of the time for me. That, plus my earlier choices in the poll, would cover about 99% of my normal use.
^{
*  Obviously they do not have to come or go as a group, but most would expect to see all or none.}
Posts: 3,283
Threads: 104
Joined: Jul 2005
I think, the reason why the 42S has the main functions of the top row printed on the keys is the relatively small display. In order to show two stack levels on the screen the menu line must be hidden most of the time. Without a menu line, the top row is useless, except if decorated with a set of default functions.
Compare this to the large screen devices (48 family) and the 17b or 27s. Both have a blank top row and permanent menus. Having permanent markings on these keys just doesn't make sense when the menu line is always shown.
Posts: 556
Threads: 9
Joined: Jul 2007
If ALPHA and USER don't make it as primary I'll give it a miss too.
Looks like the biggest offender are trig functions  6 out of 12 taken by them. I see no problem at all saving some 'real estate' by putting then in a menu.
Edited: 17 Dec 2012, 2:49 p.m.
Posts: 556
Threads: 9
Joined: Jul 2007
Of course, top row keys under permanent menu line of the display shouldn't be labelled. I'm under the impression that the development team are trying to create the best of two worlds rather than amended HP42s
Posts: 4,587
Threads: 105
Joined: Jul 2005
That's the inevitable risk of polls: sometimes the results don't meet your expectations. Bad luck ;) But there's still enough time to push some of your friends to the polling station.
And remember it won't be a calculator designed by a committee  we'll be looking to the results but won't follow them blindly.
d:)
Posts: 4,587
Threads: 105
Joined: Jul 2005
Posts: 1,216
Threads: 75
Joined: Jun 2011
Quote:
But there's still enough time to push some of your friends to the polling station.
Ok, so here's my vote for those 12 keys:
ALPHA ALPHA ALPHA ALPHA ALPHA ALPHA
USER USER USER USER USER USER
:)
Franz
Posts: 776
Threads: 25
Joined: Jun 2007
Unshifted: sin cos tan sqrt 1/x ln
Shifted: arcsin arccos arctan ??? y^x e^x
As noted by others: x^2 can be easily accomplished, whereas sqrt(x) isn't quite as easy. If there is something more "valuable" it can be shifted sqrt.
%  I've never used this in forty years of calculator use.
Posts: 1,841
Threads: 54
Joined: Jul 2005
Posts: 1,841
Threads: 54
Joined: Jul 2005
Posts: 1,545
Threads: 168
Joined: Jul 2005
ALPHA
and
USER
 I agree. These really need to be primary functions, IMO.
Posts: 1,545
Threads: 168
Joined: Jul 2005
I also would agree that square root as primary makes more sense to me than x^2
Posts: 1,253
Threads: 117
Joined: Nov 2005
and the end of the day and after endless polls and bizantine discussions it'll turn out the best keyboard is the 41's  and they didn't obliterate anybody's opinion, go figure
Posts: 620
Threads: 14
Joined: Feb 2007
Quote: ... it'll turn out the best keyboard is the 41's ...
It cannot be the best because it has the basic arithmetic keys on the wrong side ;) The best keyboard ever is the Ti59. If only Ti had been able to manufacture proper key contacts...
Posts: 4,587
Threads: 105
Joined: Jul 2005
@Maximilian: Schönheit liegt im Auge des Betrachters.
@Angel: You don't know anything about the polls and discussions at HP before the 41 was launched, do you?
d:)
Posts: 4,587
Threads: 105
Joined: Jul 2005
15 (14 1) SQRT
15 (12 2) 1/x
14 ( 7 7) y^x
13 sin cos tan / asin acos atan
13 ( 3 10) x^2
11 LN / e^x
8 P>R / R>P
7 ( 6 1) ALPHA
7 ( 4 3) USER
5 i
5 LG
4 %
3 [Sigma+] / [Sigma]
3 H.MS+ / H.MS
3 [theta]
3 DISP
3 IP / FP
3 %CHG
2 10^x
2 HR>H.MS / H.MS>HR
2 x_ROOT(y)
1 [parallel]
... if I counted correctly. Thanks for participating.
d:)
Posts: 1,253
Threads: 117
Joined: Nov 2005
Quote:
You don't know anything about the polls and discussions at HP before the 41 was launched, do you?
Much more than you can possibly think...
Posts: 52
Threads: 2
Joined: Sep 2011
:) I missread you comment like:
"Much more than you can possibly drink..."
Who knows, what really happened at HP at that time :)
