HP-41 Service module, Eprom Box and Rambox
#1

I entered 4096 lines of Hex codes into my W&W 32K Rambox. Configuration :
one 4K bank and page 4
01000000
11111111
11111111
HP-41 switched on and ...
CPU OK followed by SELECT CPU
- key returns ROM 0:N 1:F 2:L on my HP-41CX

Now I burn 2 Eproms on a Mountain Computer MC00506A IL Eprom Programmer. One 2716 and one 2732. Both inside an HHP-16K Eprom box.
Configuration 4K and page 4
0100
0000
HP-41 switched on and ...
CPU OK followed by SELECT CPU
- key returns ROM 0:N 1:F 2:L on my HP-41CX too
Stupendous, isn't it? Thanks, Richard and Joe!!!



Possibly Related Threads...
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 3,967 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 1,932 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  HP-41 module covers and side port cover Nate Martin 1 532 12-02-2013, 01:51 AM
Last Post: Giancarlo
  PIL-box w/o IL cable = paper weight Joe Horn 15 1,861 11-26-2013, 01:05 AM
Last Post: Les Wright
  Box left at HHC Tim Wessman 1 532 09-26-2013, 11:05 PM
Last Post: Wlodek Mier-Jedrzejowicz
  HP-97 Service Manual, newer model davorin 6 846 09-16-2013, 10:45 AM
Last Post: davorin
  Need service information for HP 82161A Cassette Drive Peter N1 2 477 07-14-2013, 04:11 AM
Last Post: Tony Duell
  9815 Service Module John Ioannidis 0 339 06-10-2013, 02:56 PM
Last Post: John Ioannidis
  Service manual for HP9872C plotter? John Ioannidis 2 457 05-21-2013, 02:06 PM
Last Post: Juergen Keller
  HP85 Programmable ROM cardtridge 82929A-service ROM not working- inaki 2 607 04-25-2013, 08:08 AM
Last Post: inaki

Forum Jump: