DM-15CC questions
#1

1. Every time I connect my DM-15CC to computer via USB I see big voltage drop of the battery (0.1-0.15V usually) after several mnutes. Is it ok?
2. Any success using program save/load? Translator at http://www.rpn-calc.ch/nut_decoder.html fails to decode almost all programs. Some commands are not supported or are decoded wrong way. I'm sure that's because I do not understand how to use it properly.

x34

#2

I'm in contact with Michael because I'm extending my HP-15C simulator to interact with the DM-15CC. Two weeks ago they were working on a new firmware and saving/loading of programs had lower priority. Michael confirmed that the decoder doesn't work all right.

Torsten

#3

Thanks, will wait and enjoy the calc.



Possibly Related Threads…
Thread Author Replies Views Last Post
  DM-1x Silver vs. DM-1xCC Aluminum quality? bhtooefr 11 3,275 04-14-2013, 07:08 PM
Last Post: bhtooefr
  Flashing the DM-15CC Geoff Quickfall 11 3,372 01-14-2013, 05:18 AM
Last Post: Mike (Stgt)
  Review of the DM-16CC hpnut 1 1,117 01-04-2013, 04:21 PM
Last Post: Guido (Canada)
  DM 15CC silver edition arrived! Hans Holzach 10 3,175 12-05-2012, 01:40 AM
Last Post: Juergen Keller
  dm-15cc battery life David Griffith 7 2,333 12-04-2012, 10:07 PM
Last Post: Walter B
  DM-1xC vs. HP Voyager KINOMI Csaba Tizedes (Hungary) 4 1,831 10-10-2012, 07:25 PM
Last Post: uhmgawa
  DM-xxCC Default Display Values Mark Hardman 3 1,471 09-13-2012, 03:42 PM
Last Post: Lode
  DM-15CC (and other DM-xxCC) ROM V8 x34 0 864 08-30-2012, 05:50 AM
Last Post: x34
  DM-15CC ROM grabbing David Jedelsky 4 1,542 08-21-2012, 01:04 PM
Last Post: David Jedelsky
  DM-15cc arrived Ethan Conner 25 6,350 08-18-2012, 02:55 AM
Last Post: aurelio

Forum Jump: