NoVRAM 64 USB programmer
#1

Ok, where does this little piece with the module "plug" go on the USB programmer? :-)

#2

Hi Gene,
Orienting to your picture, the module end for Nov should be pointing to the right, insert the adaptor into the socket starting from the top, the handle side. You will need to give enough room between the adaptor and the socket for the module to plug in.
I hope this helps,
Kerem

#3

Hi Gene,

You'll find a picture of the adapter attached to the USB programmer in the final chapter of the ClonixConfig.pdf utility manual which is included in the latest software download archive available at www.clonix41.org.

Hope this helps.

Diego.

PS, sorry I don't have this picture handy to include it in this post.

Edited: 29 June 2012, 11:34 a.m.

#4

Ok, so like this? I had the 2008 Clonixconfig file I downloaded from the site. Found the "CD" .zip file and it had the updated copy.

#5

Perfect! ;-)



Possibly Related Threads…
Thread Author Replies Views Last Post
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 1,629 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  USB flashing/Li-po boards patryk 6 2,371 09-08-2013, 12:31 PM
Last Post: patryk
  USB Chargers for HP calcs Matt Agajanian 3 1,522 08-18-2013, 10:58 PM
Last Post: Craig Ruff
  HP-41CL & NoV(-64): Race condition? Geir Isene 11 3,253 05-03-2013, 01:59 PM
Last Post: Diego Diaz
  USB vs DVD Han 9 2,793 04-19-2013, 06:05 PM
Last Post: Robert Prosperi
  [Clonix/NOV] NoV-64 backwards compatibility Doug (NYC) 0 960 01-20-2013, 11:21 AM
Last Post: Doug (NYC)
  OT: when a programmer passed away Mike (Stgt) 0 854 01-17-2013, 10:19 AM
Last Post: Mike (Stgt)
  NOVRAM 64 / HEPAX bug? M. Joury 2 1,215 11-03-2012, 02:49 PM
Last Post: M. Joury
  File transfers over USB Charles C(UK) 5 2,089 08-10-2012, 08:04 AM
Last Post: Charles C(UK)
  HP41 / SY41CL Mini-B USB Power Connector (Module) Matt Kernal 5 3,145 07-08-2012, 06:23 PM
Last Post: Diego Diaz

Forum Jump: