OT-Novus 3-level RPN. What were they thinking?
#1

Hello all.

Perhaps you could shed some light on this mystery. A very intriguing curiosity is why the 4515 (Mathematician) incorporated a 3-level RPN without either R^ or Rv but the 4525 Scientist had a 4-level stack with a Rv manipulator which does facilitate R^ by way of a trio of Rv strokes. So, what was the point of a 3-register RPN stack without even stack manipulation keys?

#2

Albert Einstein: "Everything should be made as simple as possible, but not simpler."

#3

Good point. Although, with three registers, there's not much promise to evaluate complex expressions.

#4

Some years before even HP thought 3 levels were enough ;-)

#5

What were they thinking? "Memory is expensive."

#6

Yet, the little beast is programmable... 102 program steps! If there is a forth stack register, chances are program steps would be reduced to hold its contents and surely extra ROM would be needed to accommodate the necessary handling operations for the extra register. Nothing comes for free, indeed.

Edited: 29 June 2012, 8:11 a.m.

#7

Interesting that it does not have EEX funtion which limits its scientific use in the sense of what we expect from calculators today. It is almost like a programmable digital slide ruler with 8 digits.

#8

Three levels is sufficient for a straight numerical evaluation of a polynomial using Horner's method.

#9

Intriguing idea. That's a good point.

#10

I think complex functions were way in the future at the time these products were made. Users combined their calculators with pencil and paper, as they did with classic slide rules. I wonder if there were complex slide rules of some kind...

#11

I acquired (for free) a Novus 4510 Mathematician in early 1977. This model was not programmable but I have fond memories of it as it was my first RPN calculator. It was soon replaced with an HP-25. As Kerem mentioned, it's biggest limitation was not the 3-level stack as much of the lack of exponents (EEX). This handicap severely limited its usefulness for scientific calculations.

http://www.thimet.de/calccollection/Calculators/Novus-4510/Contents.htm

#12

The real limitation IMO was that it only had one storage register, although it did at least have limited register arithmetic. One interesting feature that was not found on other single register calculators of its time was the M+x^2 capability, which made single variable statistics calculations possible. When the HP 45 came out with 9 storage registers instead of only one on the HP 35 plus full storage arithmetic, it completely obsoleted the HP 35. Also, display control was a big improvement over the HP 35.

#13

I have that one and other 3 level stack RPNs. To me the biggest problem with Nat Semi / Novus's implementation of a three level stack is that the top register does not replicate. One can't do repetitive arithmetic by loading the stack and rolling it.

Lincoln R's answer above is spot on. It could be worse though. There were a lot of RPN 2 level stack machines. Even scientific and programmable ones.

#14

e.g. Sinclair Scientific

#15

Michael; no fair. you've been studying. but there's more!

from memory, because i'm locked out of my non hp rpn page by "an annoying web spider"........... the sinclair scientific programmable and at least one elektronika scientific model use a two level stack.

now to give the devil his due; no less an authority than dave hicks has said that a two level stack is NOT rpn, just consistently postfix. dave is "the dude" but i respectfully differ, if only to have more non hp RPNs to choose from.


edited to correct my stupidity


Edited: 30 June 2012, 1:52 p.m.

#16

The restrictions to these machines are similar to what TI had created with their SR-50 and SR-51 models: No parentheses and just multiply/divide/exponentiation before addition/subtraction. In order to compute a product of sums a memory register had to be used. It must have been a constraint imposed by the available memory. The 51 has linear regression but this occupies the whole machine so that almost no other function is available while a regression analysis is in progress.



Possibly Related Threads…
Thread Author Replies Views Last Post
  Four-Level RPN and the Real World Matt Agajanian 14 5,989 12-13-2013, 03:57 PM
Last Post: Manolo Sobrino
  [PRIME] RPN: another attempt at returning more than one value to the RPN stack Marcus von Cube, Germany 5 2,382 11-05-2013, 02:44 AM
Last Post: Marcus von Cube, Germany
  WP-34S: Battery Level - some questions Marcel Samek 5 2,015 09-15-2013, 06:24 PM
Last Post: Marcel Samek
  HP's thinking behind the 20b/30b? John Ioannidis 3 1,624 09-07-2013, 10:21 AM
Last Post: Tim Wessman
  OT--'The Big Bang Theory' and RPN/HP--Any connections? Matt Agajanian 19 5,165 09-05-2013, 08:27 AM
Last Post: Adrien Bertrand
  OT: RPN calculator/dmm by ESI Kees van der Sanden 2 1,488 05-25-2013, 01:38 PM
Last Post: Kees van der Sanden
  OT: RPN port to Casio fx-cg10/20? Matt Kernal 4 1,911 04-30-2013, 12:16 PM
Last Post: hugh steers
  OT--AOS vs RPN Quad Requirements Matt Agajanian 0 866 08-14-2012, 12:40 AM
Last Post: Matt Agajanian
  Single Level X^2 for HP-35...Any ideas Matt Agajanian 0 987 08-11-2012, 10:01 PM
Last Post: Matt Agajanian
  OT-non-HP and non-US RPN calcs Matt Agajanian 11 3,196 06-30-2012, 09:16 PM
Last Post: Matt Agajanian

Forum Jump: