Re: WP 34S Beginners Guide
#1

I have been working through the manual. It is a very good effort, I like how it is put together.

I have found something that is either incorrect, or my understanding of how it should work is wrong.

On page 165, regarding deleting and correcting data, it indicates if you key in an incorrect value and have pressed <sigma>+, that all that must be done is press <sigma>- to correct it. That does change the Xn value, but not the value in the X register, it only decrements X by the value of Xn since that is what was on the stack. I believe Last X should be keyed before pressing <sigma>- to ensure the X value is decremented correctly.

#2

I assume you are right. SIGMA+ is one of the few commands that disable stack lift so a RCL L just overwrites then n count in X and you can delete the data point with SIGMA-.

Time for a stats editor (similar to the matrix editor MED I wrote) that allows for list based statistics.



Possibly Related Threads…
Thread Author Replies Views Last Post
  [WP-34S] Unfortunate key damage with update to V3 :( svisvanatha 5 3,128 12-10-2013, 11:37 PM
Last Post: Les Bell
  WP-34S (Emulator Program Load/Save) Barry Mead 1 1,764 12-09-2013, 05:29 PM
Last Post: Marcus von Cube, Germany
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 2,456 12-04-2013, 11:14 AM
Last Post: Barry Mead
  [HP Prime] Typo in English Users Guide Timothy Roche 2 1,449 11-15-2013, 04:10 AM
Last Post: dg1969
  WP 34S/43 ?'s Richard Berler 3 1,997 11-10-2013, 02:27 AM
Last Post: Walter B
  My FrankenCulator (wp-34s) FORTIN Pascal 4 2,089 11-09-2013, 06:18 PM
Last Post: FORTIN Pascal
  WP 34S Owner's Handbook Walter B 5 2,585 11-09-2013, 05:34 PM
Last Post: Harald
  wp 34s overlay and programming. FORTIN Pascal 6 2,837 11-08-2013, 01:28 PM
Last Post: Nick_S
  m.dy in display of WP-34S Harold A Climer 3 1,900 11-05-2013, 11:28 AM
Last Post: Andrew Nikitin
  WP 34s : An old problem coming back Miguel Toro 2 1,694 11-05-2013, 03:00 AM
Last Post: Marcus von Cube, Germany

Forum Jump: