Posts: 54
Threads: 13
Joined: Feb 2012
Hi again,
As mentioned in previous postings, I was unable to flash my 30b from Linux or Mac, but I managed to flash it into WP-34S's from a Win7 computer. I experienced a few hangs (as also reported by others) and decided to try latest firmware, but now I am stuck again.
What I did:
on-D
on-STO (reported "Saved...")
on-S
I then connected the cable and tried to upload latest firmware using the "MySamba" program in the same way as for the initial reflashing. No connection.
I have since tried the "erase-reset" combination described here several times, with various combinations of reboots, pulling batteries etc, but still no luck.
Suggestions welcome!
Posts: 3,283
Threads: 104
Joined: Jul 2005
You need to press ON to start the device in SAM-BA mode. Do not leave the batteries in for any length of time if you are unsuccessful. Fresh batteries are always a good idea for flashing.
If the "No connection" error appears instantly then the comport is not recognized by the system. Use the hardware manager to check if the port is available.
Posts: 18
Threads: 3
Joined: Sep 2011
If you simply want to flash you WP-34 then send it to me and I'll do it for you for free.
If you want to help on doing it from a Mac I'm happy to help. I flash mine using a VMWare Fusion system.
Posts: 54
Threads: 13
Joined: Feb 2012
Thank you, Marcus!
That was exactly the hint I needed to proceed, MySamba was trying to talk to the wrong port. I rarely have to touch Windows computers, so when I try I am more than a little lost. Looking forward to having a Linux alternative, and if I can help with testing such a program, let me know.
Posts: 54
Threads: 13
Joined: Feb 2012
Thanks, but my interest is as much in getting it to work, as in the finished product itself. :-)
In your VMWare setup, you run some version of windows in the virtual machine?
Posts: 18
Threads: 3
Joined: Sep 2011
I run Windows XP under VM Fusion 4. I can't be bothered to upgrade to Windows 7 as I don't need it. The Windows session is only used for odd things like VMWare session management and stuff like this.
Rob.
Posts: 1,368
Threads: 212
Joined: Dec 2006
Tom, I run XP under VMWare Fusion on two machines. No problem with flashing and re-flashing, provided I follow the erasing and resetting steps set out in that hpcalc.org link.
Les
