dead 41CV

This machine has worked since 1978 or so, and has indeed been back to HP (who seem to have hams for hands).

Anyway, it was working as I was doing calculations, then quit in a few seconds between the time I set it down and picked it up again, possibly 4 sec or so. As I wasn't watching, I don't know what exactly it did.

No display or response.

It was then disassembled, the broken posts etc reinforced and glued, but still no response. Contact appears to be made to all the pieces.

It has the extra board with CPU etc, and does not appear to have any opens or etc on the display.

Any OTHER ideas? Symptoms (and life) are noticeably lacking!


That caught me once many years ago.


so I am not just popping up here to ask a dumb question with no research.

There used to be a bunch of folks commenting on fixing 41C units, they must have all left by now.....................


I have had terrible luck with the style of "zebra strips" that are long white rectangles with the conductor going up through the middle of them. The "zebra strips" are the things that connect the logic board with the keyboard. If the connection is no good, then the calculator won't work.

Do you have these kind of "zebra strips," or the other kind where the conductor wraps around the outside of a squishy tube? In either case, as I'm sure you know, you should "un-squish" the squishy part in the hopes to make better contact between the boards. I have not been able to get the white rectangle strips un-squished enough to work reliably once they stop working. Maybe others have had better luck.

This is one way (bad zebra strip connection) that a 41 calculator with all known good parts won't work at all.

Good luck, and sorry for the lack of technical terms.



Indeed, I've ressucited several 41 by just stretching the zebra strips...


strips. I think Fullnut has the CPU board, right?

The strips seem to be making contact, and the failure mode was a quick total failure. No flakyness, no indication of problems, worked and suddenly stopped.

Is the info on the CD's useful? I looked at what is available, and didn't seem to find specific 41 info. Maybe I didn't realize what was meant.....


There is a 41C service manual on the Museum CD-ROMs.



Possibly Related Threads...
Thread Author Replies Views Last Post
  Previously dead WP 34S is resurrected! JayV 2 837 04-18-2013, 12:41 AM
Last Post: Walter B
  Does anyone want dead 82001 battery packs? Michae Altmann 6 1,304 03-15-2013, 07:32 PM
Last Post: Harald
  Dead 50g after 3 months Chris Smith 13 2,034 03-13-2013, 12:28 PM
Last Post: chris smith
  More or less dead HP-67 Bernd Ulmann (Germany) 7 1,500 02-09-2013, 12:53 PM
Last Post: Ignazio Cara (Italy)
  HP-29c keyboard dead 2nd row problem Xavier A. (Brazil) 6 1,379 07-17-2012, 07:09 AM
Last Post: Xavier A. (Brazil)
  WP 34S and 'dead' HP20B Rob Willett 17 2,834 10-20-2011, 06:49 PM
Last Post: Egan Ford
  The calculator is dead - viva la HP 15C Limited Edition Joerg Woerner 38 5,552 09-04-2011, 08:44 AM
Last Post: hpnut
  offtopic: is HPCALC.ORG dead? x34 2 819 03-15-2011, 06:44 PM
Last Post: DeboT
  30b Dead 5 Key Norman Dziedzic 10 1,704 02-03-2011, 03:36 PM
Last Post: Norman Dziedzic
  Dead HP-31E, where do I start? Paul Gaster 12 2,250 01-18-2011, 09:16 AM
Last Post: robert rozee

Forum Jump: