HP 25 programming issue
#1

Hello,

I have an HP-25 that has a programming problem. When I first received the calculator it did not have this issue.

The issue: when I go to PRGM mode any step I enter reults in a 'GTO 00' command. If I press any of the shift keys the display will show that it is in shift mode but when I click on another key it just puts GTO 00.

Any ideas?

- Fouad

#2

Hi,
you have a 25 with a bad RAM chip.
The only source of spare parts is another 25 with other issue.

HTH.

Ignazio

#3

Tkanks Ignazio. Do you know which is the RAM chip so I can make the transplant?

-Fouad

#4

It's marked 1820-1564.

Ignazio

#5

Thanks .

I just hope the other one is working.

-Fouad



Possibly Related Threads…
Thread Author Replies Views Last Post
  Strange HP 25 Problem (Repair) Onur Ilkorur 5 2,962 12-06-2013, 05:13 PM
Last Post: Onur Ilkorur
  Solver issue with HP 17BII - different from 19BII Jeff Kearns 13 4,788 11-28-2013, 02:36 AM
Last Post: Don Shepherd
  HP-25 Wayne Selway 1 1,279 11-22-2013, 12:58 PM
Last Post: Michael de Estrada
  Another minor Prime hexagesimal issue Jonathan Cameron 1 1,413 11-08-2013, 02:37 PM
Last Post: Michael de Estrada
  HP Prime Solver Variables Issue Anibal Morones Ruelas 8 3,178 10-19-2013, 09:45 AM
Last Post: Harold A Climer
  Interesting Base Conversions - Porting a 1975 HP 25 Program to the HP 35S Eddie W. Shore 1 1,389 10-13-2013, 07:49 PM
Last Post: BruceH
  Voyager keyboard issue John Richards 2 1,556 09-27-2013, 07:43 PM
Last Post: John Richards
  WP-34S: Little issue with program step indicator Miguel Toro 6 2,416 09-06-2013, 12:45 PM
Last Post: Miguel Toro
  HP-25/25C Potential Matt Agajanian 14 4,338 07-17-2013, 02:57 AM
Last Post: Matt Agajanian
  HELP! WP-34S (Flashing Issue) Barry Mead 2 1,459 07-15-2013, 04:25 AM
Last Post: Marcus von Cube, Germany

Forum Jump: