HP 15c LE Display timing issues?
#1

I'm aware of the PSE bug in the current 15c LE firmware, but I'm wondering if the following issue is also present in the original 15c:

As written on page 144 in the manual, if you store/reclall a value on a matrix you can just hold the button "about 3 seconds" to cancel assignment - the calculator will display "null".

Now it looks like on my 15c LE this is rather 2 seconds or even less - also in general if the calculator does show status messages (e.g. The current row/column in matrix entering mode) they are shown so short and quickly I have hard time reading them. Is this also the same on the original 15c?

#2

The thing is just fast, and slowing it down is not flawless. IMHO, lack of speed was the weakness of the original breed (only noticeable, of course, when using the most complex functionalities) and the increased mips are, thus, most welcome. Therefore, no complains here. :-)

Cheers
Paulo

#3

I noticed the quicker time to "null" as well. While it's a lot less than the documented 3 seconds I think it's just about right for regular use. The better fix in my view is the change the documentation to "about 1 second".

#4

I would consider this an improvement. The 41-series nulls after about 1.5 seconds, and I think that's just right. IMHO it's better a bit shorter (operation may get cancelled) than too long (key accidently released before timeout => matrix overwritten).

Dieter

#5

With respect to Michael's question:

On the original 15C, the current row/column status message (when in matrix entering mode) is only shown for as long as you hold down the target matrix key (for example, while holding down the "A" key in the sequence STO A). (Unless, of course, 3 seconds elapse, resulting in cancellation / null.)

So, even on the original 15C, if you hit STO A and don't hold down the "A" key but simply press and release, you won't have time to read the status message, and may only see it briefly flash on the display.

#6

Ok, many thanks for checking! So it works as advertised :-)



Possibly Related Threads…
Thread Author Replies Views Last Post
  Re: [WP34S] Flashing Issues Les Wright 22 5,780 10-30-2013, 02:16 PM
Last Post: Les Wright
  Vintage HP 15C with bleeding LCD display Michael de Estrada 1 1,394 10-30-2013, 09:54 AM
Last Post: Jeff O.
  HP-Prime: issues in entering expressions fhub 30 7,668 10-02-2013, 12:32 AM
Last Post: Tim Wessman
  OT - A lucky find - Busicom Handy-LE LE-120A Cristian Arezzini 2 1,783 09-26-2013, 04:43 AM
Last Post: Cristian Arezzini
  Low power warning for HP-15C LE and batteries Nick_S 1 1,382 09-16-2013, 09:34 AM
Last Post: Hans Brueggemann
  ( Parenthetical Issues ) yes, pun intended. Matt Agajanian 3 1,573 09-09-2013, 05:46 PM
Last Post: Matt Agajanian
  HP 15C-LE replacement still available? Borja 16 5,385 08-22-2013, 11:16 AM
Last Post: Michael de Estrada
  JTAG on HP-12C and HP-15C LE Ingo 5 2,386 07-01-2013, 06:37 PM
Last Post: Paul Dale
  HP 15C LE extremums Richard Berler 29 8,557 05-20-2013, 03:26 PM
Last Post: Dieter
  HP-17bII+ Solve Compatibility Issues Robert Prosperi 7 2,819 04-22-2013, 10:11 PM
Last Post: Gerson W. Barbosa

Forum Jump: