Hp 97 faint printer
#1

Hello HP Museum,
I have an HP-97 with faint printing, what can I do to fix this? possibly a capacitor or resistor change. The printing is variable. Take a look.

Thanks in advance,

Fouad

#2

If you don't see the pictures here are the links:

Picture 1

Picture 2

#3

The two recommended fixes for this are:

1) Try new paper. You can buy it a most office supply stores or on-line.

2) There is a resistor (R8) on the 97 printer controller board that can be changed to control the print intensity. See page 2-4 of the service manual. From my experiments this doesn't have a huge effect, but some.

Edited: 22 Sept 2011, 11:08 a.m.

#4

Hello Katie,

I have tried different paper and have tried the same paper on my HP-41c printer and printing was excellent so I am pretty sure the paper is not the problem.

I do not own the HP-97 service manual. Can you email me the necessary pages to do this resistor upgrade?

Regards,

Fouad

#5

That really does look like the result of old paper to me. I would first try new paper.

It could be a build up of some gunk on the print head I suppose. I have repaired a lot of HP-97 printers and they have all responded well to a good cleaning. I have never had to change the resistor. Take it apart, clean everything and rebuild it. The really good news is the paper appears to be advancing evenly, a common problem that is a bit more difficult to fix.

Rebuilding the printer is intimidating at first but really isn't difficult. Get the technical manual from the museum DVD - it is an excellent investment and not expensive.

Side question: Is there any source of modern blue printing thermal paper?

#6

Hello Dan,

I have tested the same paper on a HP-82143a thermal printer for the HP-41c and it works fine. Could it be that the 82143a printer has just better printing power than the HP-97 and works better on old paper?
I will definitely take your suggestion and try to clean the print head.

Thanks,

Fouad

#7

Hello Dan,

I have heard that staples sell thermal paper.

How can I clean the print head? How do I get to it?

Regards,

Fouad



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP-97 Printer Malfunction Dan Lewis 17 5,176 11-25-2013, 10:18 AM
Last Post: Thomas Chrapkiewicz
  HP-97 Printer Troubleshooting aj04062 6 2,476 10-15-2013, 08:45 PM
Last Post: Eric Smith
  HP-97 Printer Head aj04062 1 1,148 09-11-2013, 09:18 PM
Last Post: Randy
  HP-97 Printer Head aj04062 0 918 09-10-2013, 09:19 PM
Last Post: aj04062
  HP-97 Printer parts davorin 5 2,039 08-29-2013, 02:10 AM
Last Post: Benoit Maag
  HP-97 Printer Repair Adventure LHH 9 2,793 05-17-2012, 03:09 AM
Last Post: LHH
  How does the HP-97 printer paper feed work? Harald 5 2,207 03-31-2012, 09:31 AM
Last Post: Harald
  Idler gear used in HP-97 printer Gary Robert Bosworth 4 1,603 11-19-2011, 03:39 PM
Last Post: Randy
  HP 67, 97, 97+ emulator Olivier De Smet 8 2,677 11-11-2011, 09:57 AM
Last Post: Israel Otero
  HP-97 Printer Gear Replacement XYZT 3 1,381 12-23-2010, 03:30 PM
Last Post: XYZT

Forum Jump: