Posts: 1,830
Threads: 113
Joined: Aug 2005
On page 42 of the "Owner's Handbook," The second sentence of the first paragraph reads in part
Quote:
... (see the diagram of the registers on the inside back cover).
There is no register diagram on the inside back cover.
Offered in the spirit of improvement. :)
edit: removed an error my old eyes told me existed in the naming of the default registers at power up.
Edited: 13 Sept 2011, 10:52 p.m. after one or more responses were posted
Posts: 1,665
Threads: 142
Joined: Jan 2009
Actually, the decimal points are there but are so tiny as to be almost invisible.
Posts: 1,830
Threads: 113
Joined: Aug 2005
Yup, just caught that and edited the original post. The other point remains: the reference to the back cover is valid for the original manual, but not the current one.
Posts: 1,665
Threads: 142
Joined: Jan 2009
Now if you really want to be picky, on page 61, changing the decimal separator from a period to a comma the example shows:
12.345.6700
instead of the correct format:
12.345,6700
Posts: 1,830
Threads: 113
Joined: Aug 2005
"Picky" is definitely what I'm going for here. :) Good catch. In the spirit of pickiness, I'll point out that the error you mention also occurs in the original Owner's Handbook.
Posts: 1,665
Threads: 142
Joined: Jan 2009
Posts: 1,830
Threads: 113
Joined: Aug 2005
My bad eyes again. :(
If I want to be picky, I'll have to use a magnifying glass, LOL.
Posts: 10
Threads: 1
Joined: Aug 2011
The index entry for "Hyperbolic functions" should start on a new line.
Posts: 37
Threads: 11
Joined: Sep 2011
on page 35, bottom of the page, the [+] should be a [÷]?
Posts: 1,665
Threads: 142
Joined: Jan 2009
Posts: 758
Threads: 9
Joined: Jul 2007
On page 124, under Manipulating the Real and Imaginary Stacks, "...twice restore a number to..." should be "...to restore a number to...".