3V Power Supply
#1

Hi,

I think this might be a bit off topic, but communicating through RS232 with a HP 30b while it has batteries annoys me because I don't know how much power it's drawing while the cable is attached, and, because you can't see whether it's on or off if its firmware is empty.

Would connecting the output of a 3V power supply to one of the battery holders work?

What kind of power supply could do that? If I search for linear dc power supplies on the internet I mostly find expensive ones.

Thanks!

Edited: 30 Aug 2011, 6:56 p.m.

#2

The 20b/30b do use a lot of power, 30mA or more, when communicating via SAMBA and will run down new cells in very short order, maybe under 1 hour. You can use an external power supply but you'll need to remove both cells -- not just one -- since you'll be feeding current into the remaining cell (there's no blocking diode in there).

Instead of a linear power supply, I'd recommend 2 AA cells in a plastic battery holder with some short wires to aligator clips. That will be able to supply 30mA for 100 hours if you use alkaline cells and be very inexpensive to put together.

#3

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv020.cgi?read=182547

#4

The cable alone draws power while connected, even with the caculator turned off. The level shifters are driven by the 3V contact in the socket.

You may feed three volts through the serial connector if you remove the batteries before you connect. On my development machine, I've connected a short cable to the battery terminals and run it off a cheap wall wart (switching PS).

On my carry around device, I've connected a stereo socket for the serial communication and connect it directly to a 3V FTDI USB cable.

WP 34S and USB.



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 9845 option 200 power supply Dave F 2 1,666 05-30-2013, 08:10 AM
Last Post: Dave F
  HP-87 power supply repair philippe_elie 0 944 11-18-2012, 11:12 AM
Last Post: philippe_elie
  HP-41C: +3V inner battery contact AlbertTocarLoseggs 3 1,651 03-19-2012, 04:20 PM
Last Post: AlbertTocarLoseggs
  strange classic power supply (pics) Alberto Fenini 4 2,077 01-16-2012, 02:06 PM
Last Post: Ethan Conner
  Bench Power Supply aj04062 1 988 11-12-2011, 01:59 PM
Last Post: Eric Smith
  Canon Pocketronic - Power Supply Joerg Woerner 3 1,464 10-26-2011, 09:48 AM
Last Post: Katie Wasserman
  HP71b - which power supply Alberto Fenini 6 1,864 08-18-2010, 12:32 PM
Last Post: Alberto Fenini
  6114A power supply initial price (sorry, slightly OT) Marc Ferrer (France) 4 1,593 06-12-2010, 01:22 PM
Last Post: Marc Ferrer (France)
  FSl164A hp-il/RS232 Interface Power Supply Andy Delano 5 1,789 10-19-2009, 06:02 AM
Last Post: Marcus von Cube, Germany
  What type of caps are used in Classic power supply? Dan W 8 2,328 09-20-2009, 12:06 AM
Last Post: Dan W

Forum Jump: